Separate names with a comma.
It may take a little time but I am going to get hold of a friend of mine who is a aerodynamists and has designed injector hats. He knows all that...
My guess would be an air leak between the hat and the blower. Sometimes a little silicon sealer does wonders between the two. The other...
It was only suggested to reuse the plugs if none of the cadium was burned off on a half track pass and the plug plating still looked new. At this...
It comes from the generator, the spark jump in the rotor cap, the sparkplug wires, the field building and collapsing in the coil and the spark...
My best guess would be to say media blasting. Where are you located? The owner of our car owns a media blasting service. Email me if you are...
If no backlash is written on the gear set then the setting should be .008-.010. That means that if measured in at least three points it is never...
As long as the coating has not burned off the base of the threaded area you will be OK. If there is any oxidation of the coating other than the...
Ok the 75 ft lb makes sense IF they have silver washers under the rod bolts. For SILVER WASHERS -with 50 wt oil first torque to 25 then to 45,...
Gary, that is the instructions from Brooks. I understand what you are saying and I agree with you that there is no way to comply. I guess it gives...
According to the Brooks 65 instruction sheet this is the torques procedure if you have BLACK washers under the bolts. If you have silver washers...
That Ron's pill holder is neat but it only uses Ron's unique type jets. It also costs a lot because you can change jets without taking off the...
Steve I tried all my sources and can only find them in complete sets. I think the problem is how they are boxed. I think they only come in...
The corrected 7.7 ET at 2100ft to sea level is 7.63 secs. That is assuming the humidity and temps are the same.
If one is talking about a hemi then I would have to say that just buying one straight from Brad Anderson is the way to go. Jay Payne and others...
Thats the one. Thanks Eric. We use four of those.
The problem is with regular fuel solenoids is also the orifice in the solenoid is too small. The testing I did shows that a standard NOS fuel...
This John Scialpi fuel management system that RBS now sells works great on our car. I have never had a problem with it.
69Outlaw...you probably have the same unit as us. Ours was made by John Scialpi (I hope I spelled that right). It works great. You can get them...
Not many drivers use a tach for staging or shifting. You can't take your eyes off the lights to look at a tach. As for shifting there is no way to...
Nope because the magnet does not generate enough force to open the plunger against the pressures that you are using in your alcohol fuel system....
