Separate names with a comma.
How large should a puke tank be on a blown alky car? For each side or both combined.
Not a good idea. Only reference the exhaust temp and if it is too hot then look for the problem.....barrel valve settings.....wrong nozzles....etc....
Legal 1/4 mile tracks are supposed to be the same but a few 1/4 mile and most 1/8th mile tracks may vary.
I agree with 2800.00 as well.
Anyone have any experience with the newer style 8mm belts for a screw blown combo? I heard they break alot easier and I have also heard they last...
We run our BAE at no more than 28 degrees, usually at 27 and make more hp than needed with a 14-71. We have Brad 5 heads, I dont know if that is...
30 wt motor oil 1 quart in each front box and a 1/2 quart in the rear.
We had the same thing happen on our BAE....Line hone for sure but there was nothing wrong anywhere else. Just a stressed cap.
Synthetic gear oil not only reduces the life of your gears it is harsh on track surfaces if leaked. The synthetic works great in every day cars...
$375 from Tim Mcamis for an unwelded set of funny car zoomies. Most people charge about $500 to fit and weld.
We run 120lbs pressure and have used anywhere from a 50 to a 72 depending on the track.
Installing a jet will help the 1-2 shift if it is knocking the tires off at that point.
We use the small post on the soleniod to get power which never allows it to become 24 volts.
Use one battery cut off switch to kill the ground to your primary battery.
I would try a local machinist, that may be cheaper than having ARP do it.
Good Luck with the new car, I hear there is some fierce competition near there.
What type of business are you guys in?
I agree that he should have shut off when he saw the starter tell him to, however he also was probably looking for his crew as is the usual when...
Marty, drop me an email please. I would like to talk to you about your wheels. excavation1@earthlink.net
