Separate names with a comma.
Thanks Leon How Are You Figureing This Do You Use A Program Or? Jamie
Thanks For The Reply That Tells Me How To Figure What Amout To Remove. Now How Do You Figure How Much Fuel You Need On A New Combo Such As Going...
Ok Im Going To Show My Stupidy Now. If You Have A Fuel System And Was Told Its A 1/2 Gal Rich How Do You Figure How Much Fuel To Take Out (i Know...
DOES ANYONE USE A PRERACE CAR CHECKLIST AT THE SHOP BEFORE GOING TO THE TRACK? I HAVE THOUGHT ABOUT MAKING ONE UP BUT BEING NEW TO BLOWN ALKY I...
What I Want To Know Is There A Electrical Difference In Output Voltage Can You Use The Nitro With Alcohol What Is The Difference In The Two What...
I Have Read Many Topics On This Web Site I'm New To The Blown Alky World Always Had Door Cars With Carbs I Have Learned So Much From This Site...
What Is The Difference In The Red Top Mallory Coil And The Black Top Some Refer To The Black Top As A Nitro Coil Just Wondering Thanks Jamie
Anyone Run A Fuel Filter? What Size Inlet Line? What Type Of Filter, I Was Thinking Of A Small Oberg Type Any Ideas Where To Locate It Between...
Divider Mike When You Say As Close To The Rotors As You Can Get Are You Talking Thousands Of A Inch Or 1/8 Of A Inch I Might Try This If You...
I Have A Enderle Buzzard That A Friend Of Mine Does Sheet Metal Fab He Has Put A Plate In The Back Of The Hat That Has A Roll From The Roof To The...
Thanks Bruce That Is What We Talked About Before I Just Want To Find Out If My Thinking Is Correct And If I Need To Plumb The Car Different So I...
Do Ya Think?? I Have A 14/71 Hi-helix Not A Retro Blower I Am Going To Use A Indy Intake I Want To Set The Blower Back 1.5 Inchs And Move The Hat...
I Maybe Retarded I Am Working On Putting A Air Retard On Our Car Air Shifted Lenco Im New At This But This Was My Idea I Was Going To Tee Into...
I Have A Dunn Front Mag Drive For A Bbc And I'm Running A Supermag 4 I Have The Dunn Cross For The Bottom Of The Mag And The Drive Is Set Up For...
Bob If You Would Email Me The Figures For The Fuel Systems Thanks Jamie Funnycarguy@netzero,com
WHICH TYPE OF NOZZLE WORKS BEST FOR PORTS WHERE DO YOU WANT THE DISCHARGE IN THE CENTER OF THE PORT OR JUST INSIDE I HAVE SEEN LONG AND SHORT...
What is the difference in nozzles enderle, waterman, drop in jets aerated non aerated etc which work the best and why I have seen some that look...
Has anyone ever ran the pneumatic staging control for the throttle to hold the engine at a certain rpm till the clutch or t brake is released. How...
I HAD GENE ADAMS FLOW THE FUEL SYSTEM FOR ME AND HAVEN'T USED THE FUEL SYSTEM SINCE STARTING ALL OVER WITH A DRAGSTER (WAS IN A FUNNYCAR) THEN I...
IM RUNNING A 526CI RODECK WITH A 14/71 HH I RUN HAT NOZZLES ONLY AT THIS TIME IM GOING TO PORTS AND I NEED A PLACE TO START OUT WITH ON THE JET...
