Separate names with a comma.
i don't know the exact model but my friend has a twin turbo motor in his sandrail that came out of a mid 90's mitsibishi eclipse. it is all...
I WOULD AGREE WITH LEON ON THE BARRELL VALVE . IF YOU WANT TO GET A SYSTEM FLOWED THERE ARE A NUMBER OF GOOD FUEL SYSTEM PEOPLE IN THE MARKET THAT...
LOOKING FOR A STACK INJECTION TO FIT THE FONTANA 8.3 STYLE SET UP USED OR NEW IF SOMEONE KNOWS WHERE TO GET ONE NEW LET ME KNOW THANKS JR
looking for a crank hub installer remover for a bbc 1/2-20 thread. rcd's is 3/4 only and i have found air over hydralic but they are 700.00 if...
CHRIS GLAD TO HEAR YOU ARE OKAY AND ON THE MEND. DO YOU GUYS HAVE PLANS TO FIX THE OLD CAR OR ARE YOU IN SEARCH OF A DIFFERENT ONE. IF YOU ARE...
you can use two cycle mix oil or 90 wt gear oil or you can use automatic transmission fluid. you can fill it until it runs out the 5 or 7 0'clock...
i like the 3/8 snap on it is strong and lasts a while. a little spendy but a nice tool.
THIS IS TO SHAKEDOWN AND MUDWRENCH DO YOU GUYS HAVE A OVERDRIVE LIMIT I KNOW YOU RUN 300 FT. AND AS WILL STATES SCIM ACROSS THE TOP WITH LOTS OF...
WHAT KIND OF RACING ARE YOU DOING. JR
CAN SOMEONE POST A PHONE NUMBER FOR GEORGE SITKO THANKS JR
THERE IS TWO BLOWER STYLES ONE KNOW AS THE DELTA OPENING AND THEN THE RETRO. THE DELTA HAS THE PIE OPENING IN THE CASE BUT NOT CUT INTO THE FRONT...
post some more info about your fuel system and we could give you a baseline on your hi speed jr
as slow as you are spinning your blower you probaly won't want to restrip to often as then you will have to change your tune up until it takes a...
i was wondering if some one could tell me where to get the filter that goes inside the inlet fitting on a k valve it looks like a ice cream cone...
i think the boost number is fair for an older blower at that rpm depending on motor size and compression that is a respectable number. what size...
yes i'm wondering also i assume the two wires go to the coil but not sure.
funny car guy that sounds a little big on the nozzle size typically around 56 or 54 and staggered backward is a good starting point and typically...
HI DANNY THERE IS A GUY NAMED AL MORTON IN NORTHREN CA HIS NUMBER IS 916-203-8141 ALSO THERE IS I THINK HIS NAME IS DOUG @ CRANKSHAFT SPECIALTIES...
i agree with mike on the the idle poppets to check. check to make sure none are in backwards and make sure your barrell valve is set properly on...
the small rcd pack is hard to beat it includes the charger and will spin your starter at least another 100 rpm faster. it only weights 50 pounds...
