Trick Titanium Cans - Spec Rite converters - Lenco CS1 Gear Sets

Trick Titanium aluminum can, brand new lock up The can is a dual pattern, no starter pockets. Hemi/Chevrolet bolt pattern,

New one, SFI 6.3 #A017342 - Serial # 0207-AL, 6 3/8 in. deep, needs current cert, used for mock up only, lock up $1400 OBO.

Bruno-Quick drive Spec Rite blower converters -( two) , one used, 4400 stall, six passes old ran 5.70"s $800,
The other Spec Rite Bruno blower converter is brand New, 4600 stall, still in the box, $1000 plus freight.

Carbon fiber drive shafts PST ( two), one brand new 33.5" center to center with 1480 yoke $800,

The second drive shaft PST, 6 passes old, 32 " center to center with 1480 yoke $600.

Third one, identical chromoly 32 center to center" $400. plus freight

Lenco CS1 1.68 gear set, fine spline, fresh with new clutches and steels, back from Rob Moore at APT. $500, plus freight.

Lenco CS1 1.48 gear set, fine spline, fresh with new clutches and steels, back from Rob Moore at APT. $500, plus freight

Lenco CS1 1.44 gear set, fine spline, fresh with new clutches and steels, back from Rob Moore at APT. $500 plus freight

Contact Dana Wardell - phoenixmtrspts@gmail.com

 

I sent you an email for the carbon driveshaft.

 

Are the CS2 gear sets still available?

 

Interested in the cs1 1.68 gear set if its still available.

 

Yes, I still have the gear set. If you want it, send me your address and I can calculate the freight. Thanks Dana !

 

Are they coarse or fine spline as i am needing coarse spline? My address is 2861 co rd 21n Fayette Alabama 35555.

 

Shoot me your last name Ben for the shipping label. Total with freight is $535.00. Send me a check to Phoenix Motorsports LLC, 7132 Prelude Road, Brownsburg, Indiana 46112. Thank You!

 

Bumpty Bump