New Fuel system, Aircraft starter, Engine parts, Fathead intake, and a ton more

Currently at Rage. All New roots blower fuel system w/ John Force Racing/Rage 2 hole complete hat (Medlin design as seen on Tylor Miller's PDRA Pro Boost car) With Spray bar, Hammer hat spacer with restraint plate and straps, Rage pump, Rage Nozzles, Lines, fittings, Spare jets and pills, Setup and flowed for you just call Mike with your blower and setup a time for him to flow it, at the time it was dynoed it out performed the best Chuck Ford hat by 2.5 lbs of boost!. Cost me $9,650 sell for $8,500

New RCD blower starter, aircraft style complete, has a few scratches from the shelf. Cost $2,500 new sell for $2,000+sh. The plastic plug cover got damaged in shipping and a new one is included.

New 1/2" short deck NRE Billet fathead intake for roots, it has phenolic spacer and a carbon oil tray on the bottom. Setup for digital fuel injection but can be adapted back to std. Comes with Spare quick release burst panel assy and diverter. Cost $6,000 sell for $3,500+sh Firm!

Titanium 3 hole starter dog for roots type snouts with bolts and lock washers Cost over $200 sell for $100+sh

RCD inner and outer magnesium idler bracket with magnesium mag support/spacer, unmodified and lightweight $250+sh

SSI Blower snout belt guard clamp for non tapered snouts If I remember correctly (Whichever SSI sells) snouts Cost $175 sell for $100
http://www.ssiblowers.com/gallery.html only black anodized

11mm std flange 3.5" wide blower pulleys. 51 tooth Alum in great shape. Cost $168 sell for $75+sh

11mm std flange 3.5" wide blower pulleys. 37 tooth Alum has cosmetic dings on the back of 3 teeth works perfectly. Cost $131 sell for $50+sh each or $400 for all

New 11mm std flange 3.5" wide blower pulleys. 36 tooth Alum PSI. Cost $150 sell for $75+sh

11mm std flange 3.5" wide blower pulleys. 36 tooth Mag in great shape. Cost over $300 new sell for $125+sh. RCD doesn't list these anymore, very light.

9* 11mm 3.5" wide 1-2 run belts 1595-84-PS (Except for 1 which is std) Cost $375 ea new, sell for $50+sh ea or $400+sh for all. These last forever on a roots alky car

11mm 1705-84-Carbon belt off TAD 5 runs. Cost $375 new sell for $25+sh

Blower pulley spacers 1 1/4" and 1" cost $57 and $47 new sell for $25 ea+sh

Billet magneto clamp, Black anodized and like new. Cost $90 new sell for $50+sh
https://www.rbssuperchargers.com/Products/Mag_Clamp_Billet_Alum_--2500-0017B

Lot of misc head studs, 1/2" straight various lengths $150 for all of them.

New ERD 1 1/4" stuffer plate for psi roots blower. Accomplishes inlet mod, very nice contouring, increases efficiency at mid range overdrives (30-50%). $75

New PSI 1.5" stuffer plate for psi roots blower, increases blower efficiency at lower overdrives (25-45%) Paid $200 sell for $50
or $100+sh for both

Calling, emailing, or texting is best as I don't always catch messages on ITA.

Thanks,
Trevor Sherwood
727-3six4-436eight (Keeps auto dialers and scammers away)
Soldierboy0098@yahoo.com

 

bump it up

 

bump it up

 

need oil pan for missle dry sump and a brad raised cam gear drive.

 

That pan was just a std Moroso BAE pan and went with the BAE block when I switched it out with my New NRE block as did the gear drive. I do have the Missile pump with lines still but nothing outside of what is listed in my ads. Thanks

 

would you be interested in trading your pump for a system one pump and some cash?

 

bump it up