WTB input shaft

Discussion in 'Noonan Classifieds' started by Bill Naves, Feb 8, 2015.

  1. Bill Naves

    Bill Naves Member

    Joined:
    Jun 25, 2003
    Messages:
    594
    Likes Received:
    0
    looking for an input shaft for fine spline lenco ..1.375x10 spline to fit 8 1/8 can
    billnaves@aol.com
    704 279 9543
     
    #1
    Bill Naves, Feb 8, 2015
  2. WD-50

    WD-50 New Member

    Joined:
    May 5, 2012
    Messages:
    49
    Likes Received:
    0
    Bill, Do you have OAL Dmension ?
     
    #2
    WD-50, Feb 9, 2015
  3. jay70cuda

    jay70cuda Well-Known Member

    Joined:
    Sep 30, 2009
    Messages:
    1,139
    Likes Received:
    35
    I have one with a magnet. 100$
    Text me for a pic if you want it.
     
    #3
    jay70cuda, Feb 9, 2015
  4. Bill Naves

    Bill Naves Member

    Joined:
    Jun 25, 2003
    Messages:
    594
    Likes Received:
    0
    input

    oal is 8 3/4
     
    #4
    Bill Naves, Feb 10, 2015
  5. hemi altered 378

    hemi altered 378 Blown Altered

    Joined:
    Jul 3, 2004
    Messages:
    864
    Likes Received:
    0
    i have one for a B&J, not sure if it is same spline as Lenco on trans side.I have 2 used (1 like new) input shafts for B&J Trans. Both are 10 spline on clutch side, 1 3/8". 1 is 8 3/4" total length including the 1" long pilot. The splines are 3 1/4" long. The other, is 8 1/4" total length with a pilot that is 1" long. The splines are 2 5/8" long on this one. Both are fine(26 spline) on trans side. We used 1 shaft for dual disc clutch, the other for a triple. 100$ each plus the ride.
    Darren
     
    #5
    hemi altered 378, Feb 10, 2015
  6. jay70cuda

    jay70cuda Well-Known Member

    Joined:
    Sep 30, 2009
    Messages:
    1,139
    Likes Received:
    35
    I sent you email. You never responded. I have the correct one. Try and txt me for info or photos . Unless you don't want it. 248-884-2178
     
    #6
    jay70cuda, Feb 11, 2015
  7. Bill Naves

    Bill Naves Member

    Joined:
    Jun 25, 2003
    Messages:
    594
    Likes Received:
    0
    shaft

    been trying to reach you email...I dont text
     
    #7
    Bill Naves, Feb 11, 2015
  8. Bill Naves

    Bill Naves Member

    Joined:
    Jun 25, 2003
    Messages:
    594
    Likes Received:
    0
    input

    found one thank you
     
    #8
    Bill Naves, Feb 12, 2015

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM