bruno lenco and fuel bypass wiring

Discussion in 'PSI Superchargers Tech Questions' started by ratchett13, Jul 10, 2014.

  1. ratchett13

    ratchett13 New Member

    Joined:
    Dec 17, 2011
    Messages:
    123
    Likes Received:
    0
    just wondering how some guys wire up there transbrake button , my question is if I have to use my transbrake button to put the car in forward or reverse etc.
    its going to activate the line lock and the fuel bypass everytime I hit the tb button, how do you guys wire it up to solve this problem without having to run 2 tb buttons, 1 that's hot all the time wired straight to tb and the other that you stage and run with.ive got a grid on the car if that matters
    thanks
     
    #1
    ratchett13, Jul 10, 2014
  2. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    Yes you are going to have to use the tra
    transbrske button to move the forward/reverse lever. That is mandatory. Have you thought about putting the fuel timers on a WOT switch? If you are using the transbrake button to also control your line lock then make sure you have a diode in that wire. Make sure that car is absolutely stationary when you hit the transbrake or you will burn up the band in the Bruno.
     
    #2
    Mike Canter, Jul 11, 2014
  3. blownapex

    blownapex Member

    Joined:
    May 25, 2006
    Messages:
    507
    Likes Received:
    4
    line lock and diode

    mike whats the diode for on the line lock
    how do you wire it and what kind of diode
     
    #3
    blownapex, Jul 11, 2014

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM