Custom Grind Cam

Discussion in 'PSI Superchargers Tech Questions' started by cjo632racing, Apr 29, 2014.

  1. cjo632racing

    cjo632racing Member

    Joined:
    Jan 14, 2014
    Messages:
    43
    Likes Received:
    0
    Called Crane to find out what size roller my R296/500 cam is spec. for. Found out it is a custom grind cam, What do you guy think this if for?

    .026 .026 HOT
    4778 750 intake lift
    4778 726 exhaust 1.57/EX 1.52
    51.0 BTDC 97.0 ABDC 328.0
    TAPPET 101.0 BBDC 51.0 ATDC 332.0
    4500
    9000
    606 1.300 9800
    .050 36.0 BTDC 80.0 ABDC 112 296.0
    TAPPET 86.0 BBDC 34.0 ATDC 116 300.0
    MADE ON SPECIAL 9310 STEEL CORE.
    TIMING WITH .920" DIAMETER ROLLER FOLLOWER.
     
    #1
    cjo632racing, Apr 29, 2014
  2. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    133
    not a 296 500

    email cknight@cranecams.com if you haven't yet, he should be able to answer all your questions on it.
     
    #2
    Will Hanna, Apr 29, 2014

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM