Door Car record ET 1/4 ?

Discussion in 'PSI Superchargers Tech Questions' started by KZ5 Blown SBC, Oct 2, 2013.

  1. KZ5 Blown SBC

    KZ5 Blown SBC Member

    Joined:
    Aug 2, 2013
    Messages:
    96
    Likes Received:
    7
    Just wondering if anybody knows the Quickest ET in 1/4 by a door car.The shackdown at Summit is this weekend . Wondering if any PX guys will show up an throw a different rear gear in it an run in the 5.5s:)
     
    #1
    KZ5 Blown SBC, Oct 2, 2013
  2. overkill69

    overkill69 Member

    Joined:
    May 17, 2005
    Messages:
    826
    Likes Received:
    0
    5.70

    Nickelson screw viper
     
    #2
    overkill69, Oct 2, 2013
  3. aj481x

    aj481x Member

    Joined:
    Jan 27, 2004
    Messages:
    976
    Likes Received:
    18
    It won't be that easy. :)
     
    #3
    aj481x, Oct 2, 2013
  4. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    There is no way an ADRL PX car could go a quarter mile. The Chassis would probably come apart as would the motor even with different gears.
     
    #4
    Mike Canter, Oct 2, 2013
  5. Jason Bunker

    Jason Bunker Member

    Joined:
    May 3, 2010
    Messages:
    79
    Likes Received:
    0
    5.706 by Dan Nickelson.

    5.50's isnt going to be "that" easy. Gotta go 5.60's first.
     
    #5
    Jason Bunker, Oct 2, 2013
  6. KZ5 Blown SBC

    KZ5 Blown SBC Member

    Joined:
    Aug 2, 2013
    Messages:
    96
    Likes Received:
    7
    I totally agree it won't be easy But I think its possible
     
    #6
    KZ5 Blown SBC, Oct 2, 2013
  7. Randy G.

    Randy G. Top Alcohol

    Joined:
    Jun 9, 2003
    Messages:
    1,902
    Likes Received:
    38
    On Dan Nickelson's 5.70 I estimate his car lost .02 to .03 on the run because it was spinning the tires from half track to the finish line when he got it out of the grove. You can see it on the YouTube video. The driveshaft speed on his computer from half track on was pretty ugly.

    By the "weigh," Dan's car was about 2,500 pounds when he ran it.

    RG
     
    #7
    Last edited: Oct 2, 2013
    Randy G., Oct 2, 2013
  8. JustinatAce

    JustinatAce Member

    Joined:
    Oct 20, 2008
    Messages:
    599
    Likes Received:
    9
    They wouldn't run their P/X in 1/4.. They might actually have to work on them beyond welding chassis bits back together every lap and messing with their timing maps. ;)
     
    #8
    JustinatAce, Oct 3, 2013
  9. mike recchia

    mike recchia New Member

    Joined:
    Feb 25, 2010
    Messages:
    11
    Likes Received:
    0
    http://www.youtube.com/watch?v=bqRP4jSWKuk

    We ran our car to 3.632 @ 211.06 to the 1/8 clicked it off at 4.22 sec. and went 5.870 @ 163.42 in the 1/4. If we change the rear gear and put a bigger fuel cell and leave the two speed, who knows.
     
    #9
    Last edited: Oct 8, 2013
    mike recchia, Oct 8, 2013
  10. shawn davis

    shawn davis Member

    Joined:
    Feb 27, 2004
    Messages:
    658
    Likes Received:
    0
    Probably had a 5.70 there if the chutes were not collecting air!
     
    #10
    shawn davis, Oct 8, 2013
  11. orsoweld

    orsoweld New Member

    Joined:
    Dec 19, 2010
    Messages:
    42
    Likes Received:
    0
    That was a nice run mike !!!!!!!!
     
    #11
    Last edited: Oct 8, 2013
    orsoweld, Oct 8, 2013

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM