BAE oil psi sensor

Discussion in 'PSI Superchargers Tech Questions' started by Bad1969nova, Jun 2, 2013.

  1. Bad1969nova

    Bad1969nova Member

    Joined:
    Aug 29, 2012
    Messages:
    98
    Likes Received:
    0
    Where is the best place to read oil psi on a billet brad block? Thanks
     
    #1
    Bad1969nova, Jun 2, 2013
  2. jay70cuda

    jay70cuda Well-Known Member

    Joined:
    Sep 30, 2009
    Messages:
    1,139
    Likes Received:
    35
    I read mine on the psi of the oil pump going into the motor . Or i have tapped into the system one oil filter and put it there. Haven't noticed a difference between the two in readings
     
    #2
    jay70cuda, Jun 2, 2013
  3. underby6

    underby6 Active Member

    Joined:
    Sep 28, 2006
    Messages:
    1,189
    Likes Received:
    0
    If you run an in-line filter (like me) you can measure psi. at the rear of the block. There are two plugs in the rear/bellhousing area; you'll want to read out of the 8an side - the larger of the two.

    Brandon Booher
    NHRA TAD #323
    Torque MGMT. - Owner
     
    #3
    underby6, Jun 3, 2013

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM