PSI Scrrew Blower Weight?

Discussion in 'PSI Superchargers Tech Questions' started by Blown5402, Dec 16, 2012.

  1. Blown5402

    Blown5402 Member

    Joined:
    Aug 12, 2011
    Messages:
    592
    Likes Received:
    8
    Can someone tell me how much a PSI Screw Blower weighs ready to run with drive snout, no hat? THANKS for any help! Jim 931-580-8804
     
    #1
    Blown5402, Dec 16, 2012
  2. john348

    john348 Top Alcohol

    Joined:
    May 29, 2003
    Messages:
    1,348
    Likes Received:
    5
    if no one answers with in a few days i can weigh mine when it arrives back from PSI this week
     
    #2
    john348, Dec 16, 2012
  3. Blown5402

    Blown5402 Member

    Joined:
    Aug 12, 2011
    Messages:
    592
    Likes Received:
    8
    THANK YOU from TN-PSI Weight

    THANK YOU for the offer, we are needing to know to help on planning to build a new ProMod Chassis and figuring weights now, we know our 14-71s range from 92#s to 110#s-THANKS for the help! Jim
     
    #3
    Blown5402, Dec 16, 2012
  4. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    133
    shipping weight

    A PSI D minus snout in the shipping crate is 148 lbs. It's just light enough to ship UPS, that's why I know.

    I have never weighed the crate, but if I had to guess it would be 135 bare. Pulley, snout, quill shaft, etc, I'm sure it's the better part of 150.
     
    #4
    Will Hanna, Dec 17, 2012
  5. HootersFunnyCar

    HootersFunnyCar Member

    Joined:
    Nov 27, 2003
    Messages:
    257
    Likes Received:
    8
    Shipped my screw blower and the UPS store scale was 90 lbs in the crate!!
     
    #5
    HootersFunnyCar, Dec 17, 2012
  6. john348

    john348 Top Alcohol

    Joined:
    May 29, 2003
    Messages:
    1,348
    Likes Received:
    5
    I should have sent mine from there
    mine was 140 +in the crate too
     
    #6
    john348, Dec 17, 2012
  7. Blown5402

    Blown5402 Member

    Joined:
    Aug 12, 2011
    Messages:
    592
    Likes Received:
    8
    THANK YOU for the HELP!

    I can always get the help in need on ITA! THANK YOU for the replies and Merry Christmas to all! Jim from TN
     
    #7
    Blown5402, Dec 17, 2012
  8. john348

    john348 Top Alcohol

    Joined:
    May 29, 2003
    Messages:
    1,348
    Likes Received:
    5
    Ok i weighed mine today like i said i would.
    no nozzle bodies or injector

    blower, snout with shaft and pulley

    114 pounds
    Now we know!
     
    #8
    john348, Dec 26, 2012
  9. Blown5402

    Blown5402 Member

    Joined:
    Aug 12, 2011
    Messages:
    592
    Likes Received:
    8
    THANK YOU John!

    John, THANK YOU for the help! I was hoping to loose a little weight by running a roots blower, but now, not really much weight advantage at all. We are at a cross-roads at some of our local tracks, and if you run good, they outlaw, or say no screw blowers, and what is a racer suppoes to do, SLOW DOWN? THANKS for your help! Jim from TN
    PS-plus, when the Screw Blowers get outlawed, the 16 and 18-71s start showing up again too!
     
    #9
    Blown5402, Dec 26, 2012

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM