Screw Blown Gear Ratios

Discussion in 'PSI Superchargers Tech Questions' started by MITCHILL, Feb 8, 2012.

  1. MITCHILL

    MITCHILL New Member

    Joined:
    Oct 27, 2006
    Messages:
    6
    Likes Received:
    0
    I have a ex Nitro Mickinney FunnyCar that Im setting up to run Alky. Im running a 206d Screw at 104% with Brad 5 heads TFX 511 ci. Bonanfonte 10.5 clutch, B@J Big Boy 3 speed, 9.5 top loader with 4.3 raito. Car has 36" tall tires. Carbon Camaro body. What gear raitos, Trans and Rear end, should I run to work with the 36" tyre. Advise would be apreated. Thanks Chris.
     
    #1
    MITCHILL, Feb 8, 2012
  2. youngtuner

    youngtuner Member

    Joined:
    Mar 24, 2004
    Messages:
    956
    Likes Received:
    5
    Where are you running that you can run more than 90 over
     
    #2
    youngtuner, Feb 8, 2012
  3. MITCHILL

    MITCHILL New Member

    Joined:
    Oct 27, 2006
    Messages:
    6
    Likes Received:
    0
    Im going to race in New Zealand
     
    #3
    MITCHILL, Feb 8, 2012
  4. MITCHILL

    MITCHILL New Member

    Joined:
    Oct 27, 2006
    Messages:
    6
    Likes Received:
    0
    Trans came set up for Routes Blower. 1.45 and 1.40. May try and see what happens?
     
    #4
    MITCHILL, Feb 10, 2012

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM