Installing Moser 9" center in Strange cast housing

One of the nice things on the Moser is the beefy caps - except they hit inside my Strange cast housing. These are the mods necessary to get it in.



I might have upper & lower backwards - and both need to be done



I had the thing in & out 35 times to get it fitted. Got it in with no gasket, so the gasket is the clearance.

My new 3.50 RPM droppin center - hoping for 7000 trap RPM most of the time & 7600 when "tuned-up"






more info & pictures http://www.motorsportsinnovations.com/Race-Team/procharger1.htm
GK

 

Link doesn't work. Our of curiosity, what type of car/application is this for?

 

http://www.motorsportsinnovations.com/Race-Team/procharger1.htm
ok fixed

Top Dragster Procharger best ET 6.52 specs in link above Video: http://www.youtube.com/watch?v=moEt0JGfdN4

 

Pretty neat piece of equipment you have there. I saw that you had the injectors in two different places, 16 in the port and 8 in the port and 8 in the spacer. Did you notice a difference tuning wise? May I also ask what 1st gear you have in that tranny?

 

thanks

When I had the 8 high - 8 low combination I saw 200 degrees higher EGT's on the the back 2 cylinders. This year, with 16 low in the ports the EGT's are even.