What ratios do Stage V rockers come in?

I just measured my rockers and it looks like my intakes are about 1.65 and my exhausts look like 1.5. Are these among the ratios that were offered with these rockers?

Thanks,

-Scouder

 

how did you measure them?
i thought 1.5-1.6-1.7
if the motor is together
take all the lash out
measure total lift at valve
measure total lift at lifter
do the math

 

Yeah, that's what I did. I checked the lobe using the lifters I will be running and it came to .509 on the intake. Assembled everything, put the indicator on the retainer and got .849. Doing the math gave me 1.67 (rounded up). Granted I didn't lock the lash completely out, I could still spin the pushrod with my fingers. So, I am assuming that I have 1.7, and the difference is the lash and taking the slack out of the system.

-Scouder

 

...all ya gotta do is call me, and I'll fax you a chart!

But you knew that!

 

I feel guilty asking you questions all the time unless I'm buyin' something from ya! Speaking of which, you were right, I love the cam degreeing tool. What's funny is you told me I would say that. Real simple to set up, very repeatable. Took less than 5 minutes to degree the cam. Haven't tried the thrust tool yet, but will soon.

-Scouder