brodix alloy block repair

Discussion in 'PSI Superchargers Tech Questions' started by Bob69, Sep 3, 2019.

  1. Bob69

    Bob69 Member

    Joined:
    Jul 31, 2007
    Messages:
    151
    Likes Received:
    0
    Ex aspirated race water block that lost a cylinder. Number 2 web cracked as per pictures both sides of the web.
    Thinking of converting to a street engine, low HP engine.
    Has anyone been successful in "V"ing out, welding and machining up with a web crack?

    Any guidance to a welding process would also be appreciated.
    cheers
    p
     

    Attached Files:

    #1
    Bob69, Sep 3, 2019
  2. John byob

    John byob Member

    Joined:
    Apr 13, 2019
    Messages:
    228
    Likes Received:
    2
    O
     
    #2
    John byob, Sep 13, 2019
  3. John byob

    John byob Member

    Joined:
    Apr 13, 2019
    Messages:
    228
    Likes Received:
    2
    Yes but wouldn’t run a big stroke though
     
    #3
    John byob, Sep 13, 2019
  4. turbo69camaro

    turbo69camaro Member

    Joined:
    Nov 26, 2007
    Messages:
    250
    Likes Received:
    10
    I have few several like that !!! The crack has to be 100% ground out to a v on both sides Also needs to be welded with an inverter style machine a standard TIG welder does not have the balls to get a good fast penetrating' weld
     
    #4
    turbo69camaro, Oct 16, 2019
  5. John byob

    John byob Member

    Joined:
    Apr 13, 2019
    Messages:
    228
    Likes Received:
    2
    how much would be the charge to do four mains?
     
    #5
    John byob, Oct 16, 2019
  6. KZ5 Blown SBC

    KZ5 Blown SBC Member

    Joined:
    Aug 2, 2013
    Messages:
    96
    Likes Received:
    7
    Yup v it out then per heat the block an use 4043 rod
     
    #6
    KZ5 Blown SBC, Oct 17, 2019

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM