SOLD - 526 Century-18 Degree Big Chief Blown Alcohol - Complete

Discussion in 'Noonan Classifieds' started by DANA WARDELL, Aug 1, 2018.

  1. DANA WARDELL

    DANA WARDELL Authorized Merchant

    Joined:
    Jul 14, 2010
    Messages:
    345
    Likes Received:
    6
    SOLD - Have a fresh, never hurt 526 cubic inch New Century 10.2 deck block blown alcohol engine, with Dart 18 degree Big Chief cylinder heads, Victory titanium intake vales and stainless exhaust, triple valve springs. Velasco 4.125 billet crankshaft, Brooks 6.735 long rods, Arias 11.2 complression blower pistons, Bullet/Crower roller cam super duty roller lifters, Manton push rods. New Century aluminum oil pan with Titan oil pump. System One external remote oil filter with steel braided lines. RCD front crank support and fuel pump extension, Enderle 1100 15.8 gpm fuel pump, Enderle K- valve, steel braided lines, checks and pump loop. MSD 12 magneto with coil and points box, new spark plug wires and plugs, RCD front mag drive. Littlefield 14-71 high helix, front discharge retro supercharger includes Stroud blower bag, blower plate and restaints, with set back plate, front starter dog, RCD front belt guard. Enderle Big & Ugly aluminum polished injector hat with 5 9/16 inch butterfly's, stainless fuel lines and nozzels, distribution block and lines. 8 mm upper and lower pulleys and belt, RCD idler and bracket. Set up for side mini starter or front blower starter $27,000 OBO, plus shipping

    Spare parts: 7 pair push rods, 2 Arias pistons, 2 Brooks connecting rods, Titanium intake and stainless exhaust valves, rod bearings, MSD points box included.

    Hughes, fresh "Shorty" power glide transmission, pro mod front pump, pro mod drum, large 10 clutch pack, large BTE ringless shaft with Deadenbear case, Hughes servo, deep aluminum pan $3,500 plus shipping

    NEW never used, 10 inch billet TCS, 4500 stall blower torque converter $1,800 plus shipping
     
    #1
    Last edited: Dec 14, 2018
  2. aafa760

    aafa760 Member

    Joined:
    Jul 13, 2010
    Messages:
    102
    Likes Received:
    4
    Dana
    Bryan Kelley here in PHX can you some pictures to me of engine .
    would make great back to my New Century engine I have now,
    aafa760@gmail.com
     
    #2
  3. DANA WARDELL

    DANA WARDELL Authorized Merchant

    Joined:
    Jul 14, 2010
    Messages:
    345
    Likes Received:
    6
    Sent you an e-mail with pictures
     
    #3
  4. gf20295

    gf20295 New Member

    Joined:
    Jan 31, 2006
    Messages:
    20
    Likes Received:
    2
    dana:

    Hughes, fresh "Shorty" power glide transmission, pro mod front pump, pro mod drum, large clutch pack, large ringless shaft with Deadenbear case, Hughes servo, deep aluminum pan $3,500 plus shipping

    is this an xp4?
    how many clutch drum?
    what gear?
    what size input?
    what size output?


    do you have a used 1100 pump available?

    i misplaced your phone number..sorry

    thank you

    greg
    gf20295@gmail.com or 734 552 7408
     
    #4
  5. smokinboyz

    smokinboyz Member

    Joined:
    Oct 16, 2006
    Messages:
    148
    Likes Received:
    0
    hi ..do yiu have a set of zoomies for a dragster/altered with aj fuel heads
     
    #5
  6. DANA WARDELL

    DANA WARDELL Authorized Merchant

    Joined:
    Jul 14, 2010
    Messages:
    345
    Likes Received:
    6
    Send me you text or email address to phoenixmtrspts@gmail.com and I'll get some pictures off to you.
     
    #6
  7. smokinboyz

    smokinboyz Member

    Joined:
    Oct 16, 2006
    Messages:
    148
    Likes Received:
    0
  8. BEDNAR1320

    BEDNAR1320 Member

    Joined:
    Oct 8, 2008
    Messages:
    323
    Likes Received:
    21
    Solid block and heads?
     
    #8
  9. DANA WARDELL

    DANA WARDELL Authorized Merchant

    Joined:
    Jul 14, 2010
    Messages:
    345
    Likes Received:
    6
    Yes, solid block and heads, very nice combination and also have a Hughes shorty glide and brand new never used converter, was built for top dragster.
     
    #9
  10. BEDNAR1320

    BEDNAR1320 Member

    Joined:
    Oct 8, 2008
    Messages:
    323
    Likes Received:
    21
    7/16 or 1/2 head studs?
     
    #10
  11. DANA WARDELL

    DANA WARDELL Authorized Merchant

    Joined:
    Jul 14, 2010
    Messages:
    345
    Likes Received:
    6
    It has 7/16 head studs, prior to assembly EVERYTHING on this engine was checked, crank, rods, pistons, heads, springs and valves, fresh valve job, fuel pump, mag and points box. It probably makes over 2500 hp and needs nothing but fuel and oil, ready to install and run.
     
    #11
  12. DANA WARDELL

    DANA WARDELL Authorized Merchant

    Joined:
    Jul 14, 2010
    Messages:
    345
    Likes Received:
    6
    Bumpty Bump
     
    #12
  13. DANA WARDELL

    DANA WARDELL Authorized Merchant

    Joined:
    Jul 14, 2010
    Messages:
    345
    Likes Received:
    6
    SOLD - SOLD - SOLD
     
    #13

Share This Page