New true billet NRE parts for sale: Block, Gear drive, Roots intake, and Valve covers

Discussion in 'Noonan Classifieds' started by Soldierboy0098, Feb 10, 2017.

  1. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,416
    Likes Received:
    16
    NOW CONSIDERING TRADES, SEE BOTTOM

    -New true billet NRE block, Front mounted oil pump design (No more knocking the oil lines off with a rod)
    1/2" Short deck
    4.5" Bore
    2" Spread lifters
    1" Lifter Diameter
    65mm Babbit cam (Can go to 60 mm roller by changing bearings)
    O-ringed decks for the ultimate in sealing
    Main, gear drive, oil pan, and bell housing studs included
    -New NRE front oiler billet gear drive w/ crank support bearing for the above block
    $9,000 +Sh FIRM (Cost $10,450 new)

    -New Pair of super trick Billet valve covers (Machined aluminum finish)
    Aluminum o-ringed captive nuts
    Handles for pulling the covers off
    $1,800+Sh FIRM (Cost $2,400 new) Will take $1,500 if purchased with block or intake. Will knock even more off if you buy the block, covers, and intake!

    -New NRE billet intake (Picked up 60 HP on the dyno over BAE as Per Jamie)
    Roots design
    Can be used as digital or std injection with adapters (Not included)
    Comes w/ NRE fuel rails
    Carbon belly tray to keep hot oil off the intake
    Phenolic spacers to keep heat from the heads from transferring into the intake
    -Spare quick release burst panel (4 bolts and the whole assy is changed)
    $5,000 (Cost $5,750 new)

    Package deal may be possible

    All new and best of all no waiting.

    Buyer picks up or pays shipping from 34610 Cash, Money orders, or bank transfer only.

    This engine takes all off the shelf fathead parts save for the gear drive and the oil pan. Olson sells the pans or NRE will send the pattern to a company of your choosing. Intake is currently at Rage fuel systems in SC and would ship from there.
    ---------------------------------------------------------------------------------------------------
    TRADES CONSIDERED: All trades would have to be straight up in value (Or very close to it) or for if your trade is lesser in value you would have to provide a cash difference.

    Nice blower K-11/F-11 non modded or modded, possibly SSI F-3 or later

    -New Bryant billet 4.150 Crank (Will have to find out what bob weight I need)

    -3 spd Lenco, needing 1.25*1.25 gear sets would take other gear sets but the price would have to be lower as I would have to trade them in.

    Center section w/ 1480 yoke and 10" 4.56 gears, pref new gears and billet case but would consider Strange ultra cast cased setup

    -70 Plymouth (2 door) Satelite, Roadrunner, or GTX, 71 Roadrunner, 1969 Dodge charger possibly a 68, 1968 to 1970 GTO or Lemans, 71 Cuda, 70 Challenger, 70 Buick GSX or Gran Sport, 67-70 Mustang fastback. Tri 5 Chevy's, Others possible just ask.

    Calling or emailing is best as I don't always notice the ITA PM's.

    Thanks,
    Trevor Sherwood
    727-364-4368
    Soldierboy0098@yahoo.com
     
    #1
    Last edited: May 3, 2018
  2. Aussiebattlr

    Aussiebattlr Member

    Joined:
    May 24, 2016
    Messages:
    58
    Likes Received:
    2
    Would you sell heads and covers seperate ? PM'd you
     
    #2
  3. raceman526

    raceman526 Member

    Joined:
    Jan 21, 2008
    Messages:
    74
    Likes Received:
    0
    Do you have any pictures of the valve covers can you text them to me 620-874-5109 Curtis
     
    #3
  4. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,416
    Likes Received:
    16
    Sure, I can send some later today. They are works of art.
    Thanks,
    Trevor Sherwood
     
    #4
  5. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,416
    Likes Received:
    16
    to the top
     
    #5
  6. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,416
    Likes Received:
    16
    Bump it up please
     
    #6
  7. Outlaw Race Engines AZ

    Joined:
    Apr 3, 2018
    Messages:
    9
    Likes Received:
    1
    can you send me some pics of the valve covers please
     
    #7
  8. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,416
    Likes Received:
    16
    Sure, I would need your email address They may be pending a sale and should know something soon.
     
    #8
  9. Outlaw Race Engines AZ

    Joined:
    Apr 3, 2018
    Messages:
    9
    Likes Received:
    1
    jason@outlawraceengines.com
     
    #9
  10. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,416
    Likes Received:
    16
    #10
  11. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,416
    Likes Received:
    16
    Bump it up please
     
    #11
  12. aafa760

    aafa760 Member

    Joined:
    Jul 13, 2010
    Messages:
    102
    Likes Received:
    4
    Trevor is block solid or the water version?
    How complete is the deal
    I have a original 71 Roadrunner 383 4spd my first ever car!
     
    #12
  13. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,416
    Likes Received:
    16
    Hi, Solid as a rock. No water jackets. Thanks
     
    #13
  14. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,416
    Likes Received:
    16
    Hi, solid as a rock, no water jackets. Not sure what you mean on how complete, best to give me a call and discuss. 727-364-4368. I Will be available from Friday to Monday, and from 10-3 pm tues through thurs
     
    #14
  15. Donreed

    Donreed Member

    Joined:
    Nov 17, 2015
    Messages:
    106
    Likes Received:
    0
    want to purchase valve covers if available
     
    #15
  16. Donreed

    Donreed Member

    Joined:
    Nov 17, 2015
    Messages:
    106
    Likes Received:
    0
     
    #16
  17. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,416
    Likes Received:
    16
    Hi Don, just noticed your message, I rarely catch them so calling is usually best. They are still available please give me a call at 727-364-43Six8. Thanks Trev
     
    #17

Share This Page