Cs1 with auto setup

Discussion in 'PSI Superchargers Tech Questions' started by jay70cuda, Feb 15, 2017.

  1. jay70cuda

    jay70cuda Well-Known Member

    Joined:
    Sep 30, 2009
    Messages:
    1,139
    Likes Received:
    35
    anyone know or use a cs1 with a quickdrive or Bruno? Some questions , why can a cs2 be started in neutral and then shift into gear when a cs1 won't? When you lift at top end how do you get the unit to let go of the engine if you shut the engine off clean thru the lights ?
     
    #1
  2. overkill69

    overkill69 Member

    Joined:
    May 17, 2005
    Messages:
    826
    Likes Received:
    0
    Not sure what you mean Jay.. We ran cs1 and 2 with a Bruno and they function the same. Same reverser and sprag design. The cs2 shifting is a little different mechanically and I think the pod pressure was different.
    Be very careful with the reverser and get the billet planetary. They are fragile and almost everyone kills one while trying to sort out their first converter drive.
     
    #2
  3. GTPerf

    GTPerf Member

    Joined:
    Oct 22, 2006
    Messages:
    204
    Likes Received:
    5
    X2 overkill69 is right there is no issue with the CS1 ,,,, did you buy a reverser that has no neutral ?
     
    #3
  4. lucky devil

    lucky devil Member

    Joined:
    Apr 14, 2008
    Messages:
    283
    Likes Received:
    11

    Yep , there is a knack on using te transbrake to select gear......
     
    #4
  5. Joad Donnelly

    Joad Donnelly Member

    Joined:
    Jul 2, 2009
    Messages:
    84
    Likes Received:
    0
    There is indeed. I've fount the key is not trying to move between forward and reverse while it is bound up, sometimes this involves tickling the trans brake button. Another useful tip is to back up in high, this dramatically reduces the brake pressure required to stop and is a lot easier on the fragile reverse planetary.

    Joad
     
    #5
  6. jay70cuda

    jay70cuda Well-Known Member

    Joined:
    Sep 30, 2009
    Messages:
    1,139
    Likes Received:
    35
    So why is it when I had my clutch I always had to start it in gear. Or after a burn out my leg is dying waiting on auto guys who are resting comfortably or eating ice cream, waving to fans.... lol. And my foot turns to jelly bouncing like thumper the rabbit. Can someone walk me thru there starting Up to launching procedures
     
    #6
  7. Comax Racing

    Comax Racing Member

    Joined:
    Sep 20, 2006
    Messages:
    673
    Likes Received:
    7
    Not an expert on the converter drive Lenco's but is sounds like you don't have a neutral position on your transmission. Pretty easy conversion.

    Corey
     
    #7
  8. lucky devil

    lucky devil Member

    Joined:
    Apr 14, 2008
    Messages:
    283
    Likes Received:
    11
    Hi Jay , email me waynenicholson@btinternet.com
     
    #8
  9. TOL

    TOL Active Member

    Joined:
    May 18, 2005
    Messages:
    1,350
    Likes Received:
    17

    Can you expand on the yellow bit please ?.........
     
    #9
  10. jay70cuda

    jay70cuda Well-Known Member

    Joined:
    Sep 30, 2009
    Messages:
    1,139
    Likes Received:
    35
    Both of my trans have neutral. But when I start the engine in neutral and try to pull it into gear it just grinds.
     
    #10
  11. GumBGone

    GumBGone Member

    Joined:
    Feb 11, 2007
    Messages:
    158
    Likes Received:
    0
    Are you applying the trans brake before trying to shift? The Converter drive out put will spin until the brake is set.
     
    #11
  12. jay70cuda

    jay70cuda Well-Known Member

    Joined:
    Sep 30, 2009
    Messages:
    1,139
    Likes Received:
    35
    I have a clutch now. Going to an auto unit. I don't have anyone around me who I can ask about this. Just saying what I know happened using my clutch, I don't see anyone using a cs1 with auto just cs2 guys or b&j
     
    #12
  13. TADHemiracer

    TADHemiracer Member

    Joined:
    Dec 9, 2010
    Messages:
    359
    Likes Received:
    14
    My dragster has a clutch and if I do not have the clutch release bearing close enough to the clutch arms, my trans grinds, too. Might close up the clearance between the throw out fork and the clutch.
     
    #13
  14. Jason Green

    Jason Green Member

    Joined:
    Feb 20, 2016
    Messages:
    97
    Likes Received:
    5
    At the end of the run I would knock o e of the levers fed and that would cause the trans to let go of the motor.
     
    #14
  15. sammy christian

    Joined:
    May 29, 2013
    Messages:
    84
    Likes Received:
    6
    you need to use the transbrake as if it were your clutch pedal, hold it to shift from neutral to forward or reverse to forward. obviously, don't push it while the car is rolling unless you have already put it in neutral.
    At the end of the run, you dump the air off all pods so it freewheels.
     
    #15

Share This Page