Separate names with a comma.
We have used MGP exclusively for 15 years , we run them for 20 1/4 mile passes . We check the bearings every 3-4 runs and always endure the oil is...
We use the Hammer / Bohr hat with the spiral spray bar . It works really well and has really helped our performance . I can’t put an ET / HP...
I have just bought one , it looks better and more comfortable than the inflatable eject bag. I will let you know how I get on with it .
I have seen a couple of Turbo Cars get hung up on this subject and spend a lot of time on manifold / runner design.
LUCAS Oil do an Extreme Valve train Grease ....great stuff
One of the reasons we changed from a 3.9
Yes we do , I am sure you will have to manipulate the timing curve. we are using a Powergrid
Yes , our rear gear is a 4.30 and we do run a Bruno Drive with a 3 speed Lenco. We did actually initially start with a 3.90 rear gear
I run a 2.01 First in my 3 speed Lenco. we have gone 6.14 at 235 so far . 2650 door car
I would suggest a 4.30 gear
I would always recommend a Snap On one. Always get the calibration checked every year regardless of brand and only use it as a Torque Wrench...
Using our Bruno behind a Blown Bick Blocky Chevy was ok , when we swopped to BAE Hemis we started to struggle with heat. We tried an onboard...
✌️
I could be interested in the Hat if you split things
A popular piston in a 521 , I have the spec at home . I usually order these direct from BAE
I have run a BRUNO for a few years , like anything else you have to know how t functions and what makes it tick. I like it
MGP HEMI Rods Wanted , 7.335 centres or GRP. New please Iam in the UK and will transfer funds no problem and arrange my own shipping...
We have used LUCAS for 10 years and not had ANY Issues at all , great products.
Thank you for the replies , yes the installed height is understood to be the height of the spring not including any shims. I guess what I am...
BAE 6 Alcohol Heads . 2.1 installed height , what is considered to be the maximum amount of shims you would use ? Thanks