Separate names with a comma.
Herein lies the problem with running a clutch that way. When you start with 3 new discs, then cut them every time, you pretty much have a...
Bob passed away several years ago. Chris has not run the car since before he passed.
A number of things come into play. Inertia helps snap the tire at the hit. If you are running a tall gear, a high launch helps get the car...
front row
Call me at 979.415.4959. I have run the Kruse Missile Top Dragster with a very similar combo since 2014 along with Keith Zimmerer's screw blown...
2021 Outlaw Fuel Altered Champion Roller FOR SALE 2000 Spitzer 32 Bantam Altered -134” wheel base -Approx 160 runs total -Spitzer carbon front...
With a 2.10 low and 4.29, you will need a looser converter pump to not be as aggressive at the hit. You will also need timing manipulation. The...
Idle GPM is a much more accurate way to get someone started. Too many variables between one guy's 83% leakdown and someone else's. You want a...
Unfortunately Larry passed away last year. Smart guy.
You need to study the blow down procedures of an A/Fuel car and stick to them religously. A motor with the compression of a N/A motor will blow...
Please take a moment to complete the survey below regarding participation and TAD parity. https://www.surveymonkey.com/r/2HC6VXV
When my dad was racing with Jay Meyer in the early 80's, somehow two pumps flow sheets got mixed up and a smaller pump was put on the car without...
Mike in my experience the shift retard function of the grid is too late to be a wheel speed control. Once the rpm drop has happened, it's already...
Here is the best way explained to me to set cam sync sensor: Take plug wires off or plugs out (for safety) and turn ignition on. The light on...
If you don't have a different set of tires or if the rollout didn't change, I would have to say when you tightened up the limiters, you...
the more flex the chassis has, you are creating more pinion angle and bite. same thing the more the car squats, the rear drops and creates more...
I had a conversation with Brad Hadman one time about slip tubes/joints. His opinion was those slip joints and tubes are very dependent on track...
if you are going to run old parts there are no ways around pulling valve covers to inspect. Reid makes rockers for a number of applications...
I think a D rotor at 90 over is going to win every time. The advancements in roots blower technology have been getting more boost at lower...
I'm not a huge fan of 70 wt in general in a blown alcohol engine. If you have 'normal' tolerances, 50 wt in the winter and 60 wt in the summer,...