Separate names with a comma.
interested in all ti clutch and ti can
is it all straight and flat?
I am interested in it
Do you know steve harker?
do you still have 10,5 top loader diff with carbon brakes for dale?
Interested in 10.5 rear with carbon brakes
When are you located
Awesome racing family
Your friends from australia
sent you a pm
check tunnel in block is round and straight(straight edge in main tunnel with feeler gauges)
get crank checked for runout in seal area(may have...
Crankcase pressure, in case of head gasket or holed piston?
give me a ring,i will fill you in on the retainers you need
i was not happy with trick either,i got a bellhousing redrilled to chevy pattern by them,
got shipped to australia,dialed to can...
a big thank you to ken,1st class service,organised my parts while he was ill,got me the
right parts at the right price,then frieghted them to me...
my chevy with indy intake 9.8 deck,1600 8 mm belt combo worked fine,as mentioned earlier in post,i redrilled intake and radiused entry to suit psi...
i had a very similar combo to yours,496 bbc indy manifold 14/71 hi helix not retro blower,i put a 6"setback on the blower worked...
why do you want to run manleys,when there is grp,mgp and bme available,if you tell them a existing rod wieght,they might build something close
plumb it in to the back of the block,it goes directly to the main feed it will work better there.
worked for me..
the 1600 8mm belt fits my 9.8 deck engine fine with indy intake/psi just fine.
my car suffered similar problems,i use a moroso accumulator has helped.
its either an accumulator or dry sump setup?
8 qts a little lite...
thanks for the info,i will buy a new one.the price of a new one is worth it,i like my legs/ankles the way they are(its in a...
any opinions on best flexplate for bbc around 1800 to 2000hp,have a b and m flexplate,tearing it up.
heard good things about the wheel...
lenco mounts generally a good idea if front case fails,can and will take your legs out!
not that it is that common but a local racer had his...