shortest blower belt possible

Discussion in 'PSI Superchargers Tech Questions' started by Scott Coxwell, Dec 14, 2013.

  1. Scott Coxwell

    Scott Coxwell Member

    Joined:
    Aug 26, 2013
    Messages:
    47
    Likes Received:
    0
    I'd like someone to tell.me what is the shortest strongest type blower belt I can get? Not being used to drive a blower at all.
    thanks
    Scott
     
    #1
  2. sune

    sune Member

    Joined:
    Jun 20, 2009
    Messages:
    141
    Likes Received:
    0
    How about the belts drives from the HDs those are rather short
     
    #2
  3. doug_ta

    doug_ta Member

    Joined:
    Nov 19, 2004
    Messages:
    78
    Likes Received:
    0
    Scott,

    For starters , what tooth style do you want ???? and second THIS IS IMPORTANT what is the centre to centre measurement from the blower snout to the crank bolt ?????
    in a perfect straight line of coarse.

    This will determine where you need to be with belt length, it is not magic just give some more information.
    Then someone will be able to help you\, for sure.

    Doug
     
    #3
  4. GTPerf

    GTPerf Member

    Joined:
    Oct 22, 2006
    Messages:
    204
    Likes Received:
    5
    belt

    I think you should find an industrial supply house that sale "Gates Poly Chain" , Google it. that's all a blower belt or HD drive belt is , there are many different ones that are not in racing, tooth, lengths, width, and what there made of, try someone like " Applied Industrial Technologies" if you can get someone there to care about your small order that's the trouble I have hade with these type suppliers in the past.
     
    #4
  5. Scott Coxwell

    Scott Coxwell Member

    Joined:
    Aug 26, 2013
    Messages:
    47
    Likes Received:
    0
    belt drive

    [​IMG]



    his is what im trying to duplicate as lite as I possibly can...
     
    #5
  6. TOL

    TOL Active Member

    Joined:
    May 18, 2005
    Messages:
    1,350
    Likes Received:
    17
    Call the Gates Technical department. They will ask you many detailed questions about load forces, jerk forces, duty cycle, application specifics, etc, etc, etc, and then they will align you with the best solution from their product mix. You have to really go through that process, otherwise you'll just be grabbing a belt and hoping that "maybe" it will work. For industrial applications in the past I have always found Gates to be very willing to help. Don't just guess.....
     
    #6
  7. Scott Coxwell

    Scott Coxwell Member

    Joined:
    Aug 26, 2013
    Messages:
    47
    Likes Received:
    0
    Heck I ain't sure im smart enough to call them!!!
     
    #7
  8. secondwindracing

    secondwindracing top alcohol

    Joined:
    Feb 10, 2004
    Messages:
    2,894
    Likes Received:
    7
    scott

    I got to ask you scott what is this? looks like a pto for a 4x4 or something..I do machine work and it looks like a nice piece.Dave
     
    #8
  9. Mark Leigh

    Mark Leigh Member

    Joined:
    Mar 9, 2010
    Messages:
    446
    Likes Received:
    2
    When you call Gates be ready for the phone to go dead when you tell them what you are building ------ they don't want the liability --------------------------
     
    #9
  10. Scott Coxwell

    Scott Coxwell Member

    Joined:
    Aug 26, 2013
    Messages:
    47
    Likes Received:
    0
    .....

    something lite weight to take the place of a transfercase for a 4x4 sand rail car.
     
    #10
  11. Bjs344

    Bjs344 Member

    Joined:
    Sep 10, 2013
    Messages:
    355
    Likes Received:
    24
    You could try calling fowler? They have been pretty easy to talk to when I've called with dumb questions and might have a rep they could contact. Cold calling gates seems like a good way to get a headache.
     
    #11
  12. Scott Coxwell

    Scott Coxwell Member

    Joined:
    Aug 26, 2013
    Messages:
    47
    Likes Received:
    0
    Thanks,I am still trying to figure out how to build this for my mud rail. I keep breaking a single 60 chain.
     
    #12
  13. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    If you keep breaking a belt. Then maybe something wrong with you tuneup that is causing a backfire up into the blower. Too much ignition retard can cause that, running too lean can also cause it.
     
    #13
  14. Bob Meyer

    Bob Meyer Comp Eliminator

    Joined:
    May 13, 2003
    Messages:
    763
    Likes Received:
    36
    I think I understand what you're thinking......
    If it's not a good environment for a chain, it'll more than likely be worse with a belt and aluminum pulleys. Mud had sand, pebbles, and rocks!
    Maybe good German double row chain in a completely closed box ?
    But then again, those moto bike kids seem to get chain to work,
     
    #14
  15. greenracing

    greenracing Member

    Joined:
    Jul 2, 2008
    Messages:
    74
    Likes Received:
    10
    Scott's building a transfer case Mike, this isn't a blower belt :)

    We built a chain drive case years ago that we used in our Mod 4x4 pulling truck. We wanted something that we could change ratio, and the SCS gear boxes weren't out yet. We used a 4 wide 50 chain. We ran it several seasons and the chains would live unless we got to really severe bouncing (like all 4 wheels off the ground the driver really should have stopped 15 feet ago bouncing :) )

    Frankly, I'd look for a used SCS case somewhere and be done with it.

    -Perry
     
    #15
    Last edited: Oct 18, 2017
  16. Scott Coxwell

    Scott Coxwell Member

    Joined:
    Aug 26, 2013
    Messages:
    47
    Likes Received:
    0
    Yes I could go back tongue drawing board and use a double 50 chain instead of the single 60 but I'd really like it to be "trick" and loose a ton of rotating mass while at it. All that stuff is heavy!! I've got no prior knowledge of belts, I see on gates website they list all sorts of belts and lengths with different teeth pitch and size etc. I don't know which one may be stronger than the other. I'm needing a 15% reduction and center to center is like 11 inches if memory serves me right.
     
    #16
  17. Scott Coxwell

    Scott Coxwell Member

    Joined:
    Aug 26, 2013
    Messages:
    47
    Likes Received:
    0
    I really don't have the room for one without major work!!!
     
    #17
  18. ryley1471

    ryley1471 New Member

    Joined:
    Oct 20, 2017
    Messages:
    1
    Likes Received:
    0
    Anyone have any overdrive tech help. 498 bbc dart 360 ,grp rods, Ross 8:1 pistons with a stripped 8-71 at 46% over. I put on a mooneyham 14-71 stripped. Do I need to drastically reduce my overdrive ?
     
    #18

Share This Page