WTB Crank Bolt

Discussion in 'Old NRE X-1 Heads Free Classifieds' started by KDavidson, Jun 17, 2009.

  1. KDavidson

    KDavidson Member

    Joined:
    Dec 7, 2005
    Messages:
    284
    Likes Received:
    0
    Need a 1/2"-20x2.00" crank bolt with either a 1.95" OD washer or integrated flange with 1.95" OD for RCD blower hub. I had the Automan grade 9 bolt and washer on the old crank and it worked great, but is 3/4".

    Any help is greatly appreciated!

    Thanks,
    Keith
     
    #1
  2. JIM HARDISON

    JIM HARDISON New Member

    Joined:
    Apr 7, 2009
    Messages:
    15
    Likes Received:
    0
    Call RCD @ 530-292-3133

    just ordered 2 from them @ $40 a piece, they said no problem

    the part number you need is 358850-50

    jim
     
    #2
  3. KDavidson

    KDavidson Member

    Joined:
    Dec 7, 2005
    Messages:
    284
    Likes Received:
    0
    Jim,

    According to Paco @ RCD, they are only 1.45" long. That is the part # I WAS going to purchase. At 1.45" long it only gives me .25" thread engagement into the crank. If you click on that part # on their website, it goes to the price list and there that part # is listed as 1.45" long.

    If you get yours and they are 2.00" long let me know!

    Thanks,
    Keith
     
    #3
  4. JIM HARDISON

    JIM HARDISON New Member

    Joined:
    Apr 7, 2009
    Messages:
    15
    Likes Received:
    0
    KEITH ,

    The two I ordered were alot different than you needed.
    p/n 358875-60 3/4-16 X 3.00, 1.45 FLANGE CRANK BOLT GUN DRILLED.

    we had one come off in Dinwidde va and did not notice it til we were checking rods and noticed that the crank pulley had moved about .55
    needless to say we were very happy to find that in the trailer and not at dinwidde this weekend... lesson learned red loc-tite and 300ft lbs

    i would think that they could make you one or two if needed.
    have you checked ARP


    JIM
     
    #4
  5. Blownalky

    Blownalky Top Sportsman

    Joined:
    May 9, 2005
    Messages:
    811
    Likes Received:
    6
    Keith,

    I bought one like that a bit ago but it has the 1.45" flange, you may need a washer under it if it needs to be that wide. This is off the RCD website.


    358850-50 1/2-20 X 2.05, 1.45 FLANGE 1/2-20 HEAD $36.92


    It is 2.05" long and the head is drilled for an accessory. Barry should be able to hook you up.

    Tom
     
    #5

Share This Page