Windage Tray

Discussion in 'PSI Superchargers Tech Questions' started by Comax Racing, May 26, 2009.

  1. Comax Racing

    Comax Racing Member

    Joined:
    Sep 20, 2006
    Messages:
    673
    Likes Received:
    7
    Is it worth putting a windage tray in a blown alcohol engine. I used to run one with my old block but with the new block its going to be a bit of a pain to fit it on the larger billet splayed caps etc. Should I just scrap the idea, this new engine is going to have so much more power I don't think a windage tray is going to matter much.

    Any opinions would be appreciated.:)

    Corey
     
    #1
    Comax Racing, May 26, 2009
  2. Chuxluv

    Chuxluv Member

    Joined:
    Jul 9, 2003
    Messages:
    67
    Likes Received:
    0
    Windage Tray Info

    Corey, I believe in a windage tray not so much for the extra horsepower but it helps keep the oil from being sucked up and away from the oil pump. Good oil pan with a windage tray that fits the rods and drain back loovers should be the only way in my book. That my story and I been there before. Chuck
     
    #2
    Chuxluv, May 26, 2009
  3. Eric David Bru

    Eric David Bru Member

    Joined:
    Sep 4, 2005
    Messages:
    417
    Likes Received:
    1
    Agreed.

    EDB
     
    #3
    Eric David Bru, May 26, 2009

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM