Where to get clutch linkage?

Discussion in 'PSI Superchargers Tech Questions' started by Will Hanna, Apr 2, 2009.

  1. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    132
    Where do you get the clutch linkage heims and turnbuckle at? Is it something I can run down to fastenal and get? I don't have a turnbuckle in front of me, are most of them 5/16"? Need the turnbuckle with right and left thread, along with right/left hiems.
     
    #1
    Will Hanna, Apr 2, 2009
  2. Comax Racing

    Comax Racing Member

    Joined:
    Sep 20, 2006
    Messages:
    673
    Likes Received:
    7
    Clutch Linkage

    I usually build my own. Just thread heavy wall CM tube and you can get the rod ends at any bearing house.You could also use tube adapters. The hardest thing to get will be the left hand tap,a machine shop supplier will have them.


    My 2 cents

    Corey
     
    #2
    Comax Racing, Apr 2, 2009
  3. Woodchip

    Woodchip Top Alcohol Dragster

    Joined:
    Aug 27, 2004
    Messages:
    429
    Likes Received:
    0
    #3
    Woodchip, Apr 2, 2009
  4. blwnaway

    blwnaway Member

    Joined:
    Jun 28, 2006
    Messages:
    411
    Likes Received:
    1
    Most any chassis shop will have this stuff. 5/16 or 3/8 are common but we prefer 5/16. If you dont have a local chassis shop then try www.jerrybickel.com
     
    #4
    blwnaway, Apr 2, 2009
  5. john348

    john348 Top Alcohol

    Joined:
    May 29, 2003
    Messages:
    1,348
    Likes Received:
    5
    #5
    Last edited: Apr 2, 2009
    john348, Apr 2, 2009
  6. secondwindracing

    secondwindracing top alcohol

    Joined:
    Feb 10, 2004
    Messages:
    2,894
    Likes Received:
    7
    #6
    secondwindracing, Apr 2, 2009
  7. Flyingpig

    Flyingpig Member

    Joined:
    Aug 20, 2006
    Messages:
    131
    Likes Received:
    0
    This is all good information. I was looking for the same stuff to make some throttle linkage for my semi. OEM is VERY expensive and built to order because its a 20 year old tractor.
     
    #7
    Flyingpig, Apr 4, 2009

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM