WHAT TO DO NOW...Buzzard/Whipple ?'s

Discussion in 'PSI Superchargers Tech Questions' started by Ozzy Osborn, May 6, 2008.

  1. Ozzy Osborn

    Ozzy Osborn Member

    Joined:
    Feb 27, 2008
    Messages:
    158
    Likes Received:
    0
    Anybody got a solution to making the barrel valve clear on a buzzard/whipple combo. I have had no luck finding a 3" spacer for a buzzard ( 15 1/4" bolt pattern). Can the "K" valve be turned around, tilted...????????

    Thanks,

    Ozzy
    432 580 8828
    432 559 6395
     
    #1
  2. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    #2
  3. JP

    JP Member

    Joined:
    Oct 8, 2005
    Messages:
    229
    Likes Received:
    0
    whipple

    I had that same setup a couple of years ago and what we did that time mas to make an adapter that sort of looks like a "z" that moved the barrel valve away from the inyector like 2 inches. On the arm at the inyector blades a spacer was fitted for the linkage . Worked very well..
     
    #3
  4. Worms

    Worms Member

    Joined:
    Feb 6, 2006
    Messages:
    118
    Likes Received:
    0
    I have what you need, the "z" spacer and the longer on the barrel valve side throttle shaft for a buzzard, but they in Australia, If you are interested, I could mail them to you. P.M. me if you want them. They will be cheap.
     
    #4

Share This Page