WANTED std deck 10bolt a/fuel or stack injectors

Discussion in 'Noonan Classifieds' started by ITS IN MY BLOOD, Dec 26, 2017.

  1. ITS IN MY BLOOD

    Joined:
    Dec 2, 2004
    Messages:
    1,082
    Likes Received:
    1
    Loooking for a std deck 10 bolt A/Fuel intake manifold or Large Hilborn stack injection unit to fit early Brad 10 bolt fuel heads. Maybe even a Indy 10 bolt Tunnel ram with removable top , and tapped fittings in runners.
    thanks
    Vic Miller
    541-806-1074
     
    #1
  2. REEHL EQUIPMENT

    REEHL EQUIPMENT Active Member

    Joined:
    Mar 17, 2004
    Messages:
    1,404
    Likes Received:
    12
    Perhaps you should look into a blower manifold, and an injector with a spacer in between, like Tom Topping used to run on A/Fuel.

    That way, you could always switch to a blower later on.

    Just a thought.
     
    #2
  3. ITS IN MY BLOOD

    Joined:
    Dec 2, 2004
    Messages:
    1,082
    Likes Received:
    1
    Interesting,..got any ideas on who would/ or could make one..??
    I have a Mag KB intake and a crower 8 port.

    thanks
    Vic
     
    #3
  4. REEHL EQUIPMENT

    REEHL EQUIPMENT Active Member

    Joined:
    Mar 17, 2004
    Messages:
    1,404
    Likes Received:
    12
    Try Alkydigger or put a wanted ad up here.

    Quite a few of them were out there.

    Also, you could stack a couple of Enderle injector spacers.

    Good Vibrations sells them.
     
    #4
  5. Cpt Kludge

    Cpt Kludge Member

    Joined:
    May 15, 2009
    Messages:
    35
    Likes Received:
    1
    Vic,
    Spent a lot of time a few years ago looking for this kind of 'transition' piece from blower manifold to injector. Never did find anything suitable. Thought about using an empty blower case but that would just look weird on an injected car. Lol!

    Any good fabricator should be able to build what you need. The guy that built my chassis, Bruce Dyda, might be able to build you what you need. I know he's fab'd manifolds before. He's in Gardena, Ca. I'll dig up his contact info and send it to you.
     
    #5
  6. nitrowannabe

    nitrowannabe Member

    Joined:
    Oct 9, 2006
    Messages:
    313
    Likes Received:
    4
    Bruce is a regular on the classic funny car board as is Bic.
     
    #6
  7. raceman526

    raceman526 Member

    Joined:
    Jan 21, 2008
    Messages:
    74
    Likes Received:
    0
    I have a Enderle A-Fuel Buzzard Dow coated injector $800
     
    #7
  8. ITS IN MY BLOOD

    Joined:
    Dec 2, 2004
    Messages:
    1,082
    Likes Received:
    1
    I have a injector. I need the intake.
     
    #8

Share This Page