Upgrade Bruno from 1" to 1.25" input shaft

Discussion in 'PSI Superchargers Tech Questions' started by Dirty Deeds, Apr 12, 2023.

  1. Dirty Deeds

    Dirty Deeds New Member

    Joined:
    Nov 27, 2016
    Messages:
    25
    Likes Received:
    1
    I have broken my 1" Bruno input shaft (cause is tyre shake according to Bruno Snr). in our hemi/psi powered RED.
    I am upgrading my Coan covertor to 280mm so it seems logical to upgrade to the bigger bruno shaft at the same time.
    As I'm in NZ its expensive to ship to Brunos to upgrade so asking if ITA members can give me instructions on what machining is necessary?
    I already have a near new 1.25 shaft and drum, 1.25 wear/rub plate and C6 pump gears. From what I have read I still need C6 pump and stator support. Has anyone got part numbers or correct description so I can purchase locally.
    Any help is appreciated
    Cheers Neil
     
    #1
  2. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    #2

Share This Page