TFX 92 Sleeves

Discussion in 'Manton Push Rods Top Alcohol Tech Questions' started by Darryl351, Dec 3, 2017.

  1. Darryl351

    Darryl351 New Member

    Joined:
    Sep 6, 2014
    Messages:
    10
    Likes Received:
    0
    Hi, I am after some sleeves for my 4.375" bore TFX 92 block. Can anybody tell me if I need to buy sleeves for this particular block or will other TFX models, BAE or Keith Black sleeves fit?
     
    #1
  2. superpro453

    superpro453 Member

    Joined:
    May 12, 2007
    Messages:
    90
    Likes Received:
    0
    #2
  3. REEHL EQUIPMENT

    REEHL EQUIPMENT Active Member

    Joined:
    Mar 17, 2004
    Messages:
    1,398
    Likes Received:
    11
    You need to look at the ones in YOUR block.

    In the beginning, they made some blocks to fit KB sleeves, because some people switching over from KB had many sleeves left over from their KB program.

    Remove some of yours first before buying any.
     
    #3
  4. WIDEOPEN231

    WIDEOPEN231 Member

    Joined:
    Jun 10, 2011
    Messages:
    38
    Likes Received:
    5
    My TFX-92 sleeves are different than KB sleeves. I did how ever make ol KB's work but had to trun out side down about half way up. First those suckers are hard and take slow turning with good tooling. If your paying to have done buying may be cheaper. I might have some old 4.310 stuff you can get bored if interested contact me at wydopn2312@yahoo.com.
    Chris
     
    #4

Share This Page