Sealant used on Blower case

Discussion in 'PSI Superchargers Tech Questions' started by Winr, Dec 8, 2019.

  1. Winr

    Winr Member

    Joined:
    Apr 4, 2005
    Messages:
    69
    Likes Received:
    7
    Question for all you that maintain you own blowers. I just went through mine (first time) and the only concern I have is what sealant are those of you with out rear rotor plate gaskets/seal using as a sealant. Upon disassembly I found a very thin coat of an amber-ish colored sealant between the plate and case ( Mike Kuhl 1471) it was also used on the front Gear case cover gasket and it is unfamiliar to me. What say you .
     
    #1
  2. kosky racing

    kosky racing Comp Eliminator

    Joined:
    May 11, 2003
    Messages:
    890
    Likes Received:
    48
    sounds like monkey snot 3m rubber adhesive stick everything together including your fingers
     
    #2
  3. Winr

    Winr Member

    Joined:
    Apr 4, 2005
    Messages:
    69
    Likes Received:
    7
    Could be...
     
    #3
  4. andy wilfong

    andy wilfong Active Member

    Joined:
    May 13, 2003
    Messages:
    190
    Likes Received:
    28
    Here at Littlefield’s, we use Yamabond 4, it’s what Yamaha used to seal their motorcycle cases
     
    #4
    GregM784 likes this.
  5. Winr

    Winr Member

    Joined:
    Apr 4, 2005
    Messages:
    69
    Likes Received:
    7
    thanks
     
    #5

Share This Page