Ring help

I run 4.187 bore TFX. have been running Total Seal rings (1/16 1/16 3/16) gapless second with no luck. Bad leak down after a couple runs. I'm wanting to change to a conventional package. With my pistons (Venolia) not set up for a Dyke ring, what are my options? This is a 7.0 ET low boost combination (20psi).

Thanks
Steve

 

Rings

Call Bruce Walker - Tel: (661) 775-2775 Cell: (661) 803-1089
Tell him Andy from NY gave you the #... Trust me you will thank me later...

 

Ring Package Recommendations

Steve, let us all know any ring package recommendations that you receive that may help all of us! I am having leak down problems from 16 to 20 passes. That is on a BAE fathead at 52#s boost at 9600rpm. EGTs under 1000 degrees and cadmium half burned on the hottest cylinders. Thanks, Jim
PS-or csmjimbkyle@bellsouth.net if it does not need to be made public?



QUOTE=Andy C;194822]Call Bruce Walker - Tel: (661) 775-2775 Cell: (661) 803-1089
Tell him Andy from NY gave you the #... Trust me you will thank me later...[/QUOTE]

 

[/QUOTE]



What is your bore size?

 

4.375" and .017 dykes top ring

For me, it is 4.375" bore and a .017 dykes top ring-THANKS! Jim




What is your bore size?[/QUOTE]