Pro Mag 44

Discussion in 'Pit Buzz' started by ThrowdOff, May 17, 2015.

  1. ThrowdOff

    ThrowdOff New Member

    Joined:
    Sep 26, 2012
    Messages:
    20
    Likes Received:
    0
    Blown alcohol engine with Pro Mag 44. Starts and runs, but timing light will not fire. Any ideas on problem? Just cheap parts store timing light, but tried it on personal vehicle and works fine.
     
    #1
    ThrowdOff, May 17, 2015
  2. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    132
    timing light

    obviously it's the timing light.

    At very least invest in a flaming river timing light.

    The best money is the MSD timing light. If you can't see the timing mark good and get the timing wrong, you can tear up a lot more than the money you will spend on the timing light. The MSD is the brightest one I have used and makes it easier to see the timing mark. The Flaming River one will get the job done, just not as bright.

    I'm not a fan of anything with a dial on it for "advance." You want a 'dumb' timing light. You don't want the timing light to have the ability to move on it's own.
     
    #2
    Will Hanna, May 18, 2015
  3. ThrowdOff

    ThrowdOff New Member

    Joined:
    Sep 26, 2012
    Messages:
    20
    Likes Received:
    0
    Thank you, Wil. That is what it was. New timing light works great.
     
    #3
    ThrowdOff, May 18, 2015

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM