Nostatila 125" f/c chassis 23t altered roller hemi or bbc plates, lenco, misc hemi parts

Discussion in 'Noonan Classifieds' started by Brian Gawlik, Jan 27, 2019.

  1. Brian Gawlik

    Brian Gawlik New Member

    Joined:
    Jan 19, 2018
    Messages:
    18
    Likes Received:
    0
    92 Horton chassis 125" wheel base 6.0 cert 23T body painted, Aluminum wing cage mount, bead lock wheels, centerline fronts, hemi and bbc motor plate, brand new fire supression system-dj bottles new;all stainless lines/fittings, new front strange brakes, with new master c yl, 14 gallon poly fuel cell, c02 mount, fabricated 9” rear, strange center section with 4.33 gears, full floater, Rjs seatbelts good till end of 2019
    Trick titainium 8 1/8 bell fresh cert, fitted to car

    $13,000 with bell
    $11,500 without bell
    Prices negotiable , ready to sell

    tfx 92
    ready to run with headstuds w/spares,
    oil pan studs, complete gear drive: idler bearing new, cam gear inc and new crank gear, bellhousing studs are 7/16 with countersunk bolts that go through motor plate, 10 oil pan gaskets new, 6.025 long fuel pump extension
    4.375 bore
    Has 1 large window and couple small, repaired at AJ
    make offer need gone!

    Crower aluminum small stand 10" pedel clutch
    Titanium donut, NEW springs installed, spares included, fresh from crower, never run since, facings have 3 runs on them, 2 clutch packs included
    2200 obo ready to move

    Other parts available
    Lenco cs1 3 speed trans
    course input, fine output, 1.98 first gear,
    Course input and fine output shafts
    just took apart today (1/27/19) to confirm ratios, 1.44 front 1.38 rear ( 1.98 first)
    $2800 , fresh, only has few fire ups since gone over

    Brand new rcd wet sump oil pump
    with all fittings
    with adjustable regulator
    never run, brand new $900

    system 1 oil pump used
    top fuel wet sump
    longer rotor 2.4"
    all fittings included
    great shape

    $500 plus ship
     
    #1
  2. Brian Gawlik

    Brian Gawlik New Member

    Joined:
    Jan 19, 2018
    Messages:
    18
    Likes Received:
    0
  3. John byob

    John byob New Member

    Joined:
    Saturday
    Messages:
    9
    Likes Received:
    0
    How much fr ur used TFX block does it need line bore and hone?
     
    #3
  4. Brian Gawlik

    Brian Gawlik New Member

    Joined:
    Jan 19, 2018
    Messages:
    18
    Likes Received:
    0
    Sorry the TFX block is sold
     
    #4

Share This Page