Michalek Brothers Racing shop clean out sale!

Discussion in 'Noonan Classifieds' started by Michalek Brothers Racing, May 1, 2020.

  1. Michalek Brothers Racing

    Joined:
    May 21, 2013
    Messages:
    12
    Likes Received:
    0
    Spring cleaning at Michalek Brothers Racing! Pictures available for all parts. 330-936-1101 for questions.

    Buyer responsible for shipping costs from 43080.


    Clutch parts

    · (5) steel course pitch clutch stand barrels (1-1/4” diameter x 3.320” OAL) used = $50

    · (8) Crower ½”-20 x 1” flywheel bolts and washers (used – still in good shape) = $30

    · (2) ARP L19 ½”-20 x 1” flywheel bolts – no washers (used – still in good shape) = $10

    · (5) ARP 9/16” x 6-1/8” OAL flywheel studs NEW = $75

    · (11) clutch stand sleeve washers for 9/16” stud and ¾” pressure plate pilot (used – still in good shape) = $30

    · (22) Crower Blue stall springs NEW = $110

    · (18) Crower Brown stall springs NEW = $90

    · (6) Crower Green stall springs NEW = $30

    · (2) Crower Green stall springs (used – still in good shape) = $5

    · (11) ARP 3/8”-24 x 2.650” OAL stall studs (used – still in good shape) = $30

    · (1) 3/8”-24 x 2.340” OAL stall stud (used – still in good shape) = $5

    · (4) 3/8”-24 x 2.450” OAL stall studs NEW = $30

    · (6) 3/8”-24 x 2.450” OAL stall studs (used – still in good shape) = $20

    · (5) 3/8”-24 x 2.600” OAL stall studs (used – still in good shape) = $18

    · (6) .250”R x .375” thick clutch levers used (useable, but need radius polished) = $60

    · (2) .281”R x .375 thick short clutch levers (used – in great shape) = $40

    · (1) K&N clutch dust filter NEW = $5

    · (5) bell housing studs 7/16-14" x 7/16-20" x 2.125" 82 degree taper (used – still in good shape) = $25

    · (1) drive shaft speed sensor with 2 magnet driveshaft collar (1.750” ID) (used – still in good shape) = $40

    Engine and Ignition Parts

    · (2) pairs Hussey Copper header EXHAUST gaskets for BAE fat heads .070” copper NEW = $20 / set

    · (1) pair new and (1) pair used for 1 pass Hussey Copper header EXHAUST gaskets for AJPE fat heads .070” copper – new set = $20 & used set = $10

    · (2) pairs Flat Out header EXHAUST gaskets for AJPE fat heads steel clad composite NEW = $20 / set

    · (1) pair Clark header EXHAUST gaskets for BAE fat heads steel clad composite NEW = $20

    · (1) 90 degree TDC pickup (used – still in good shape) = $90

    · (2) short Leahy trigger/TDC pickup holders – left x 1pc and right x 1pc (used – still in good shape) = $20ea

    · (1) standard Leahy crank trigger holder (used – still in good shape) = $30

    · (20) Speed-Pro 142M upper main bearings NEW = $50

    · (1) complete set of (16) PSI #DR 1260ML triple valve springs (only used for dyno break in) = $400

    · (1) complete set of (16) Manley NexTek #221449E-16 triple valve springs (only used for dyno break in) = $400

    · (1) Moroso wet sump dragster oil pan w/ pickup and -16 fitting (used – still in good shape) = $350

    · (3) boxes of Manley # 13198-16 square groove valve locks (32pcs or 16 complete sets per box) for 11/32” valve and 10 degree retainer @ +.050” installed height = $50/box

    · (1pc) Manley lash cap #42104-1 NEW = $2

    · (9) standard installed height 10 degree titanium retainers for 11/32” valves (used – still in good shape) = $25

    · (2) 7” RCD timing degree rings (used – still in good shape) = $90ea

    · (1) 11-hole camshaft hub (used – still in good shape) = $40

    · (1) 2-key crank hub (used – still in good shape) = $40

    · (1) 2-key crank gear (used – still in good shape) = $40

    · (1) set of front cover studs and nuts for RCD cover for TFX block (used – still in good shape) = $10

    · (1) starter jaw (used – still in good shape) = $30

    · (1) ATI balancer to crank hub steel adapter (used – still in good shape) = $50

    · (7) Champion RN12YC spark plugs NEW = $10

    · (4) Champion RC12YC spark plugs NEW = $5

    · Spark plug indexing washers NEW = $5

    · (1) -12AN XRP fuel filter w/ chassis mount clamps for 1-3/16” OD tubing (used – still in good shape) = $25

    · (16) 9/16” x 9.150” OAL 4340 steel head studs w/ internal hex head (used) = $80

    · (7) 9/16” x 9.550” OAL tool steel head studs w/ internal hex (used) = $50

    · (1) 9/16” x 9.265” OAL tool steel head stud w/ internal hex (used) = $7

    · (1) 9/16” x 9.365” OAL tool steel head stud w/ internal hex (used) = $7

    · (1) 9/16” x 8.500” OAL tool steel head stud w/ internal hex – short upper stud for TFX mag drive tunnel (used) = $7

    · (19) 5/16”-24 serrated oil pan nuts (used – still in good shape) = $5

    · (36) 5/16”-24 flat oil pan nuts (used – still in good shape) = $10

    · (9) 3/8”-16 intake manifold flanged nuts (used – still in good shape) = $5

    · (20) 3/8”-24 serrated header nuts (used still in good shape) = $5

    · (50) 3/8”-16 to 3/8”-24 x 1.500” OAL header studs (used still in good shape) = $20

    · (27) 3/8”-16 to 3/8”-24 x 1.750” OAL header studs (used still in good shape) = $10

    · (19) 5/16-18” to 5/16”-24 x 1.700” OAL oil pan studs (used still in good shape) = $10

    · (3) 3/8”-16” to 3/8”-24 x 3” OAL rocker studs – no step (used still in good shape) = $10

    · (1) 3/8”-16” to 3/8”-24 x 3” OAL rocker studs – stepped (used still in good shape) x $5

    · (2) ARP L19 tool steel inner head studs x 3.250” (used still in good shape) = $15

    · (1) mag drive hold down claw (used – still in good shape) = $10

    Safety

    · (1) pair RJS arm restraints NEW – expired SFI cert = $10

    Tools

    · (2) wrist pin pusher tools NEW = $15ea

    · (1) weather station tool (used still in good shape) = $40

    · (1) 4.280” piston ring compressor (used - like new condition) = $15

    · (1) leak down connection tool w/ spark plug on one end of tube and air hose connection on other end (used – still in good shape) = $15

    · (1) vacuum testing plate (used – still in good shape) = $5

    · (1) set of crows feet line wrenches (3/4”, 13/16”, 7/8”, 15/16”, 1”) NEW = $10

    · (1) Ashcroft 3-1/2” 0-100psi gauge w/ ¼” NPT connection NEW = $35

    · (1) 1,000lb tow strap (expandable elastic) and storage bag NEW = $10

    · (1) Schumacher electric 12V speed charger (used – still in good shape) = $20

    · (1) homemade spark plug rack (64 spots) (used – still in good shape) = $10

    · (1) Pit Pal drum pump holder NEW = $20

    · (1) Pit pal (4) position 10oz CO2 bottle holder rack (used – still in good shape) = $50

    · (1) Pit Pal 4’ vinyl strip holder for door (only holder; no vinyl) (used – still in good shape) = $10

    · (3) CO2 regulator seals # CTN-PC2000 = $10

    · 3/8” hose w/ Jiify-Tite male and Female connections used for engine cooler x 15’ (used) = $10

    · (1) Milwaukee 2590-20 cordless radio. Audio line in to connect to phone. Can be plugged into 110 outlet or can run cordless from Milwaukee M12 battery (in like new condition) $100 new = $50

    · (2) Milwaukee M12 boxes NEW = $5ea

    · (2) Milwaukee M18 boxes NEW = $5ea

    Towing

    · Delphi FA0004 oil pressure switch NEW - $5

    · Vane position sensor for Duramax (Dorman 904-235) (used but works) = $40

    · Gooseneck Coupler Inner Tube - Round - 2-5/16" Ball used –still in good shape) = $50
     
    #1
  2. Bill Naves

    Bill Naves Member

    Joined:
    Jun 25, 2003
    Messages:
    594
    Likes Received:
    0
    is any still available?
    (1) 11-hole camshaft hub (used – still in good shape) = $40

    · (27) 3/8”-16 to 3/8”-24 x 1.750” OAL header studs (used still in good shape) = $10·
    (19) 5/16”-24 serrated oil pan nuts (used – still in good shape) = $5

    · (9) 3/8”-16 intake manifold flanged nuts (used – still in good shape) = $5

    billnaves@aol.com
     
    #2
  3. Michalek Brothers Racing

    Joined:
    May 21, 2013
    Messages:
    12
    Likes Received:
    0
    Sorry, these parts have sold.
     
    #3
  4. dwwhite

    dwwhite Member

    Joined:
    Mar 13, 2010
    Messages:
    151
    Likes Received:
    0
    on your wet sump pan..tfx? if so whats the $amount.
     
    #4
  5. Michalek Brothers Racing

    Joined:
    May 21, 2013
    Messages:
    12
    Likes Received:
    0
    Yes, it fits a TFX block. $350 + shipping.
     
    #5
  6. ATT

    ATT Member

    Joined:
    Aug 2, 2009
    Messages:
    138
    Likes Received:
    0
    #6

Share This Page