Michalek Brothers Racing shop clean out sale

o Black braided nylon hose – new ($45 for everything)

 -10 x 5-1/2’ = $15
 -10 x 4’ = $10
 -12 x 8-1/2’ = $30​

o Hose cutting tool (up to -12 hose) = $15
o Valve spring compressor (impact driven) = $40
o Mag clamp = $10
o Vane position sensor for Duramax (Dorman 904-235) = $40
o Gooseneck Coupler Inner Tube - Round - 2-5/16" Ball = $50
o Zoomie header covers = $15
o Champion RC12YC spark plugs x 8pcs = $10
o Carbonator pump motor model # S55JXRRS-8207 w/ Oberdorfer pump model # N95060GLC-80. This setup was used for chilling engine coolant and transmission fluid. = $75
o Speed-Pro rod bearings for standard hemi crank #7300-8 – new

 Complete set = $30
 2 sets of lowers only = $10 / set​

o -12AN XRP fuel filter w/ chassis mount clamps for 1-3/16” OD tubing = $25
o Hussey Copper header exhaust gaskets for fat heads

 BAE .070” copper x 2 pair – new = $30 / set ($50 / set new)
 AJPE .070” copper x 2 pair – 1 set new = $30 & 1 set used for 1 pass = $20 ($50 new)​

o Flat Out header exhaust gaskets for fat heads

 AJPE steel clad composite x 2 pair new = $25 / set ($40 / set new)​

o Clark header exhaust gaskets for fat heads

 BAE steel clad composite x 1 pair new = $25 ($40 new)​

o Electrimotion SB001 A/fuel Safety Box = $250 ($455 new)
o American Racing 16” x 16” black double bead locks w/ 4” back spacing SFI 15.3 (5 x 5-1/2) GREAT SHAPE!! = $1,500 for pair
o Goodyear D1230 rear slicks x 2 = $100 for set
o Keith Black wet sump oil pump - fresh, not run since rebuild at Keith Black. -16AN inlet x -12AN out to filter and -12AN return from filter) = $500
o Moroso wet sump oil pan for TFX w/ pickup = $350
o 90 degree TDC pickup = $90
o 2 magnet driveshaft collar for driveshaft sensor = $40
o Nozzle jets. -3 thread with 37 degree hose end on one end and an ORB o-ring on the other end. $3 each or $40 for all 16 (all new)

 38 x 2, 39 x 2, 40 x 8, 41 x 2, 42 x 2 ​

Send questions to 330-936-1101. Pictures available for all components. Buyer is responsible for shipping from 43080. Parts can be delivered to US Nationals without charge.

 

Also have LSM TQ-100 valve lash 3/8” drive torque wrench. Comes with 1/8”, 5/32”, and 3/16” T-handles. = $80 ($162 new)