MARIE FERRIOLO/FERRIOLO MOTORSPORTS TAFC MUSTANG

Discussion in 'Noonan Classifieds' started by Barry Ferriolo, Feb 1, 2020.

  1. Barry Ferriolo

    Joined:
    Nov 29, 2003
    Messages:
    194
    Likes Received:
    2
    After 23 years of racing with some of the nicest people we have ever met in our lives, we're selling.. and with heavy hearts.. our TAFC and entire contents of the trailer and shop.

    Prostart chassis-21 1/2" hoop
    BAE 521 with 6 heads
    Bryant-GRP-BAE silver stand-Jessel-Manton-Bullet duel swap-Manley-System 1
    Waterman/APS Randy Anderson fuel system
    Latest PSI blower. Only 32 passes from brand new from PSI
    Trick Titanium-Crower 10.7 titanium with center support bearing
    Lenco
    Mark Williams rear with 10" Tom's gears
    Weld wheels
    RPM computer-EM command module-EM lean outs

    Spare parts-
    Complete BAE 521 with BAE 6 heads. From valve covers to oil pan- just like above
    Complete set (2) BAE 6 heads with valves-springs and studs
    2 Lenco transmissions
    Mark Williams center section with 10' gears
    MSD 44 with PSI Mag drive- Cap and wires-Points box-Mag retard box-Coil
    Lahey command module- Mag signal converter-Tach-Shift lights
    Complete Lahey safety system
    Burst panels-EGT probes
    Windshields-Side windows
    4 chutes with pilots and packs
    Front wheels with tires-Rear wheels with tires
    Headers
    4 Fire bottles-3 CO2 bottles- 1 Fresh air bottle
    Complete oiling system with P&P pump-Oil tank-XRP filter and all lines
    Waterman/APS Randy Anderson fuel pump
    Fuel Tank/XRP oil filters
    Cam-Lifters-Springs-Valves-Pushrods-Sleves-Pistons-Pins-Rings-Rods
    Clutch Discs-Floaters-Blower Belts-Gaskets-Cables
    12 Sleeves Rod Bearings-3 Sleeves Main Bearings
    200 NGK plugs
    55 Gallons of Oil
    36 Volt starter batteries with 36 volt charger
    2 RCD starters with 2 sets of cables
    Hat tray with all the tools
    Bottom end box with all the tools
    Clutch box with all the tools
    Ray Franks clutch machine
    Kawasaki Mule
    BRAND NEW Miller Diversion 180 Tig Welder with all accessories
    All kinds of power and hand tools and testing equipment

    This is certainly not a complete list. I have lots and lots of other great stuff, but it would take forever to type out everything, being that I never took typing in school and the shop classes aren't any help...you old guys know what I'm talking about.
    $90,000 for everything I have. I an not interested in parting anything out. Thanks
    Barry bmf1320@yahoo.com
    609-758-8348
     
    #1
  2. Barry Ferriolo

    Joined:
    Nov 29, 2003
    Messages:
    194
    Likes Received:
    2
    bump
     
    #2
  3. D.Bowman4268

    D.Bowman4268 New Member

    Joined:
    Sep 6, 2016
    Messages:
    4
    Likes Received:
    0
    if you decide to part anything out (mainly tools/trays) let me know please. thank you bowman4268@yahoo.com text 405-208-1773
     
    #3

Share This Page