List of parts for sale

Discussion in 'Noonan Classifieds' started by Butch Blair, Aug 28, 2018.

  1. Butch Blair

    Butch Blair Member

    Joined:
    Feb 7, 2007
    Messages:
    759
    Likes Received:
    3
    CURRENT PARTS FOR SALE LIST


    Blower restripping stand with dual gear puller including lots of 1/2 round teflon stripping $300.00


    Sunnen Hone rod and pin fitting machine with Sunnen AG-Series Precision Gauge $1,500.00 (can ship)


    Crane R-270/500-2S-11.5 big journal 48degree excellent $350.00

    Engle R-22 small core 45 degree 112 c/l fuel roller cams excellent 2 @ $350.00 ea


    Crower .904 roller lifters 7 pair $100.00


    Smith Bros push rods 7/16” taper wall 3/8” cup oal lengths 6 - 10 5/16 12 - 12 5/16 $15.00 ea (also have a lot of 5/16 cup different lengths)


    New billet 6” pump extension with RCD pump drive for Rodeck early hemi $150.00


    Valves

    13 used 2.40 x 6.40 long x 11/32 stem 3.40 tip length titanium intake valves $30.00 ea (these are very nice long valves that could be cut to most any size)

    15 used 1.90 x 11/32 x 6.08 long .250 tip exhaust valves $30.00 ea

    12 new stainless 2” x 11/32 x 5.04 long .250 tip length exhaust valves $35.00 ea

    Lots of stainless 1.940 x 3/8 x 5.04 x .250 tip length and 1 enconal valves $30.00 ea

    4 new 1.940”x 3/8” .250 tip length enconal exhaust valves 5.12 long $100.00 all

    20 used stainless exhaust valves 1.94 x 11/32 x 5.02 long 2.50 tip length @15.00 ea


    SSI 4 stand billet front blower covers $100


    Lots of various length ½” head studs $10.00 ea


    9/16 head studs six 11” oal $20 ea













    Olson late model hemi zombie headers, double flanged 2 ¾” power coated silver with egt bungs fits AJ or Brad stage 5 fuel heads $300.00

    Same headers not power coated $250.0


    Piston installers 4.00 / 4.250 @ 30.00 ea


    C&A ring checkers (for round) 4.00 / 4.280 $35.00


    Early Hemi 392 heads, ported, o-ringed, bead blasted and like new condition (no valves) $1000.00


    SPS (MTI) air powered valve spring gun that is used with there stainless spring cups or conventional style $500.00


    6 TFX 4.187 sleeves (std deck) good used $50.00 ea.


    GRP solid beam used rods 8 6.921 & 9 6.981 long with l-19 bolts 1.094 wrist pin size @ $50.00 ea


    4.00 used Venolia coated fuel pistons (1.094) for early hemi 10 in total $150.00


    Piston & rod holder made of wood with closing door to keep clean holds 10 assembled $100.00


    Tall & short heavy made wood rod & piston holders $ 50.00 ea.



    4.250-fuel hemi coated Venolia pistons 1.094 wrist pin size c/h (12) 1.602, 10) 1.627, (8} 1.647 (new or like new) $35.00 ea.


    Copper hemi head gaskets .040 to .080 new & used $25.00 per set


    Buttons $8.00 per pair (1.094


    1 ½” and 3/8” drive shaft couplers, male, female, connectors, drive shafts etc. $50.00


    Snap On Digital / Pyrometer kit, check temp exhaust etc while engine is running $100.00


    Digital reading tire air checking / setting gauge (to the fraction) Bender Race Products $100.00


    New Longacre drag slick tire hardness gauge in leather case $50.00


    Weight gauge unit that sits on the ground and extends inside a given wheel for measuring weight at any 4 points car (0 to 1000 lbs) $75.00


    AIRCO mini ac heli ark model 130 complete with hoses, torch, regulator, small argon bottle 19” x 5” x 9” high 110 volt. (A must have at the race track) $600.00


    Portable aluminum fixture with gauges and quick disconnect fittings, hoses, air bottle for checking and setting relief valves (1 to 1,000 lbs) $300.00


    AFT air timer box for setting air timers $ 300.00


    Waterman fuel pump over drive units selection of racios $50.00


    Aluminum made fixture with air bottle for checking and setting check valves etc. $250.00


    Temperature laser gun an holder $50.00


    MSD programmable ignition controller pn. 8975 (new) $400.00


    MSD 5 stage programmable delay timer $400.00


    MSD complete set up & parts for small cap 44 amp magneto $75.00


    Hemi oil pump to magneto drives old style or SAE $40.00 ea


    MSD large older style black 44amp coils $75.00 ea


    MSD shift light and chips p/n 8952 $75.00


    MSD 8168 Pro Mag timing control box (new) $300.00


    MSD RPM activated switch kit new in package part # 8950 $50.00


    MSD new 44 amp mag small cap, rotor an top wire retainer $75


    Dave Benjamin single inlet fuel pumps with build in changeable gear sets to under drive or over drive (25 gpm to 55 gpm 1 3/8 or 2” inlet with quick disconnect attachment) $1200.00


    Enderle pills, screw in jets, drop in jets, nozzle jets $3.00 ea Enderle port nozzles with check valves for drop in jets $15.00 ea


    Enderle large billet nitro barrel valve fresh from Enderle with ck valves $500.00


    Enderle -10 4way shut off valve $50.00


    Billet aluminum fuel discharge block has 8 - 8 & 2 -12 AN outlet holes and 2 mounting holes (real nice) $100.0


    ¼” wheel spacers 5 on 5 1/2 $5.00 ea


    Moroso single spin on filter bracket flat surface or frame mount $50.00


    All Titanium AFT or L&T 10” large 6 stand glide, 6 finger including titanium stands $2000.00


    New billet aluminum East West Eng. hemi flywheel with ring gear large 6 stand (9/16” studs) nuts & bearing (trick) $600.00


    Crower 2 or 3 disk petal clutch, 10” large titanium stands, 9/16”studs, includes disk, floaters, fresh, hemi flywheel with or with out ring gear, dial indicator & weight kit $2000.00


    Titanium 10” Crower clutch donut plate (peddle clutch) (fresh) $600.00

    Aluminum $400.00 (both are very nice)


    Titanium six stands and adjusters for 9/16” studs 3 disk lengths $500.


    Lenco Input shafts 1 3/8 spline 6 spline on end $50.00

    B&J input shafts 1 3/8 10 spline B&J fine spline on the ends $75.00

    Lenco input shafts 1 ½ 10 spline $75.00


    Lenco throw out bearing and collars (4 different lengths) $50.00


    Clutch disk 1 3/8 - 1 1/2 - 1 3/4” 10 spline hubs 10” &10 ½”

    New $110.00 ea.

    Fresh surfaced disk .280 + or - $30.00 ea

    .300 to .340 $50.00 ea

    Floaters fresh surfaced 10’& 10 ½”.280 + or - $20.00 ea

    .300 + $30.00 ea

    New .330 to .350 $50.00 ea


    SPARK PLUGS



    Ecell 141 $2.00 ea.

    NGK BG 9 & 10 long reach plugs $2.00 ea.

    NGK R 9 & 10 recessed electrode $2.00


    Mag idler pulley assembly 2 5/8” belt width $100.00


    Blower Pulleys aluminum hard anodized

    8mm GT $75.00 ea

    56t new $100.00

    61t

    62t

    8mm polished aluminum $75.00

    63t

    65t with degree cut into it $50.00


    14mmGT (.320 offset) (hard anodized) $75.00 ea

    29t new

    30t used

    31t used

    32t used


    !4mm GT flat back (no offset)

    35t used $65.00

    39t used $100.00

    40t used $100.00

    41t new $1250.00


    13.9mm.

    27t $60.00 ea

    29t


    Used Blower Belts

    2 ½” w 111 t 14mm (1) $50.00 new from RCD)


    Added information and pictures available, all emails answered


    925 229 3572

    topfuel776@aol.com
     
    #1
  2. AlcoholFan

    AlcoholFan Member

    Joined:
    Aug 13, 2003
    Messages:
    74
    Likes Received:
    2
    Crower 3 disc clutch available?
     
    #2
  3. lucky devil

    lucky devil Member

    Joined:
    Apr 14, 2008
    Messages:
    283
    Likes Received:
    11
    #3

Share This Page