Lifter Help

Discussion in 'PSI Superchargers Tech Questions' started by Cdn526, Nov 20, 2016.

  1. Cdn526

    Cdn526 Member

    Joined:
    Dec 12, 2006
    Messages:
    535
    Likes Received:
    5
    I use Morel lifters on our A/Fueller, 1" bore w/ a .920 roller dia, and as these are TF lifters, they have the dbl exh roller set-up (one roller above the other).
    I have three sets, and always have one set getting re-built at Morel, thru Ken @ Motorsports Unlimited.
    Now then, Morel has quit building these lifters, and have quit re-building them.
    So...I can change lifter type & brand, and will have to change up the exh push rods (as these are shorter due to the dbl roller).
    Or, i'd like to stay with what I have; anyone out there in this vast racing world know of:
    a) someone that can rebuild them?
    b) Someone that uses these that may have a new set available to part with?
    Or, best advice on new ones (1" bore / .920 roller), which manufacturer?
    Any & all help appreciated.
    Thanks!
    Clif
    cb@nitrobull.ca
    txt 204 381 7869
     
    #1
  2. youngtuner

    youngtuner Member

    Joined:
    Mar 24, 2004
    Messages:
    956
    Likes Received:
    5
    Jesel lifters are what most of the pros and alcohol teams are running. No they are not cheap but they are a really high quality lifter. If I can help let me know.
    Jonathan
     
    #2

Share This Page