Lenco CS-1 two spd

Discussion in 'PSI Superchargers Tech Questions' started by gordon tarbell, Apr 11, 2023.

  1. gordon tarbell

    Joined:
    Sep 19, 2009
    Messages:
    70
    Likes Received:
    12
    Anyone got an accurate length of a CS-1 two spd W/rev from the front mounting face to the back of the reverser . I have 40" from back of engine plate to axle centerline. I need to see if a 8 5/8" bellhousing and and the CS-1 w/rev will go in and out with out sliding engine and plate forward. The rear is 9" ford strange drop out '
     
    #1
  2. Dirty Deeds

    Dirty Deeds New Member

    Joined:
    Nov 27, 2016
    Messages:
    25
    Likes Received:
    1
    My cs1 2 speed is 14.2 inches (360mm) from front face to back of reverser. Does not include rear output shaft
     
    #2
  3. gordon tarbell

    Joined:
    Sep 19, 2009
    Messages:
    70
    Likes Received:
    12

Share This Page