kb olds block

Discussion in 'Pit Buzz' started by TS1786, Sep 12, 2019.

  1. TS1786

    TS1786 New Member

    Joined:
    Jun 15, 2018
    Messages:
    1
    Likes Received:
    0
    any recommendations please
    kb olds aluminum block
    chevy bbc crank with hemi rear flange 8 bolt
    need a flex plate and block mounted starter ideas

    thanks
     
    #1
  2. Kindle Motorsports

    Kindle Motorsports New Member

    Joined:
    Feb 21, 2016
    Messages:
    9
    Likes Received:
    0
    I have a buddy with same set up running a 14/71 Blower. He ended up cutting the webbing that covers the drivers side where a MOPAR starter would bolt on. HE talked to a machine shop and the webbing has no structural importance. He has a 2 piece Reid Glide and is using the REID Mopar Bell.
    He contacted CSR Performance products and purchased a Pro Billet starter for it using the Top Fuel (larger) flywheel.

    I have a KB Mopar Block in a chassis truck and am using the TCI (Mopar to Chevy Bell) Mid Plate. The Starter bolts directly to the midplate. I also contacted CSR and purchased the same starter and Flywheel since I am running PROCHARGED POWER.

    Hope this helps.. Let me know

    Btw I run Div 4 TS and he runs Div 4 TD
     
    #2

Share This Page