KB head studs

Discussion in 'Manton Push Rods Top Alcohol Tech Questions' started by tek152, Jul 6, 2017.

  1. tek152

    tek152 New Member

    Joined:
    Jan 27, 2016
    Messages:
    3
    Likes Received:
    0
    I am wanting to replace the head studs on a KB stage 10 . I have struck out locating a new set.,does anyone know where I can get a set made? 1/2 in diameter studs with 9/16 threads on bottom 1/2 inch on top. Also wondering about corrosion on the H-11. This motor stays assembled all season and is exposed to moisture in oil etc.
     
    #1
  2. bandit496

    bandit496 Member

    Joined:
    May 25, 2010
    Messages:
    155
    Likes Received:
    2
    Call Lowell at New Century....he might be able to help. JW
     
    #2
  3. mogenss

    mogenss Member

    Joined:
    Feb 4, 2012
    Messages:
    94
    Likes Received:
    3
    Give BAE a call, they helped get a set together for my KB block
     
    #3
  4. tek152

    tek152 New Member

    Joined:
    Jan 27, 2016
    Messages:
    3
    Likes Received:
    0
    Thanks for the reply, have already contacted BAE AJPE and a few others. Does anyone know how to get in touch with Ken Black directly since the merger?
     
    #4
  5. Swedpuller

    Swedpuller New Member

    Joined:
    Nov 17, 2014
    Messages:
    13
    Likes Received:
    0
  6. tek152

    tek152 New Member

    Joined:
    Jan 27, 2016
    Messages:
    3
    Likes Received:
    0
    KB working thru a group of dealers now and after talking to a few was able to get info through Tim Banning (for hemis only). Was able to get some of the studs but will have to have the rest made $$$ . Tim stated they are committed to making the blocks and are working on the rest of the parts .
     
    #6

Share This Page