How to cool a bruno

Discussion in 'PSI Superchargers Tech Questions' started by secondwindracing, Mar 1, 2015.

  1. secondwindracing

    secondwindracing top alcohol

    Joined:
    Feb 10, 2004
    Messages:
    2,894
    Likes Received:
    7
    how to cool down a bruno..
    and do you just use the cooler lines..
     
    #1
    secondwindracing, Mar 1, 2015
  2. blown1969camaro

    blown1969camaro Member

    Joined:
    Apr 18, 2010
    Messages:
    455
    Likes Received:
    2
    bruno

    we put a quick disconnect fitting in pan sucked fuild out through 3 tranny coolers .using a tilton rear gearoil pump from jegs/summit . and put it back in where the pressure gauge goes in at with a quick disconnect fitting this way it goes through converter
     
    #2
    blown1969camaro, Mar 1, 2015
  3. Kramer Metal Fab Inc.

    Kramer Metal Fab Inc. Member

    Joined:
    Jul 28, 2008
    Messages:
    212
    Likes Received:
    6
    cooling trans

    Dave,
    Check with Scott Gaulter. I think I remember him using a really trick cooling unit when he was running a converter set up. Not sure if he built it or not himself but seems to me he posted photos of it here once. I know someone has posted photos of some really "COOL" trans coolers...
     
    #3
    Kramer Metal Fab Inc., Mar 1, 2015
  4. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    Mick Synder at Synder Motor Sports sells a ice chest on wheels that has a 120 volt pump on it and transmission coolers inside the ice chest. It uses those quick disconnect Jiffy Tite fittings. You install a Tee fitting on the tube that goes to the Bruno pressure gauge and another one on a fitting into the Bruno pan. You fill the ice chest with water and ice and the pump pulls the ATF out of the Bruno pan cools it in the ice chest and pushes it into the converter. Works great. As soon as the car arrives back in the pits we hook it up and cool it.

    call Mick at (219) 987-2921
     
    #4
    Mike Canter, Mar 1, 2015
  5. lucky devil

    lucky devil Member

    Joined:
    Apr 14, 2008
    Messages:
    283
    Likes Received:
    11
    Exactly that , off board coolers work great
     
    #5
    lucky devil, Mar 2, 2015
  6. GumBGone

    GumBGone Member

    Joined:
    Feb 11, 2007
    Messages:
    158
    Likes Received:
    0
    Is there a way to hook up lines to a Quickdrive that will circulate the oil in the converter?
     
    #6
    GumBGone, Mar 2, 2015
  7. Creech

    Creech Member

    Joined:
    Dec 5, 2008
    Messages:
    307
    Likes Received:
    1
    #7
    Creech, Mar 5, 2015
  8. bruce boland

    bruce boland Member

    Joined:
    Dec 29, 2008
    Messages:
    508
    Likes Received:
    1
    Cooler

    Move to Canada lol Its pretty friggin cold up here.
     
    #8
    bruce boland, Mar 6, 2015

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM