Garage sale. Lots of misc parts and tools

Discussion in 'Old NRE X-1 Heads Free Classifieds' started by Mark_Morris, Feb 24, 2014.

  1. Mark_Morris

    Mark_Morris New Member

    Joined:
    Dec 4, 2007
    Messages:
    11
    Likes Received:
    0
    Mckinney funnycar tin.
    used
    aluminum logistics box with lid
    2 fuel tank staps. fuel and oil tank bottom tray.
    dog house.
    new
    6 smaller panels measure 12" x 24" nice bead rolled panels.
    All panels are anodized black.
    $250.00 for all



    1 Gallon Mckinney pup tank for nose of mckinney dragster. $75

    hundreds of pushrods, all in good shape.
    3/8 ball from 10.600 long to 11.75 long. have tappered, straight, solid hollow and tool steel.

    5/16 ball from 10.500 to 11.250 tappered and straight, solid and hollow.
    call for pricing and sizes. $10 - $20 each

    5/16 adjustors 1 3/16 - 1 3/4 $2.50

    1 3/4 AND 1 7/8 Rob Moore input shafts.around 14 3/4 long have a few different lengths and have with splines to fit 4,5 and 6 disc clutches $100

    AFT jet bodies for screw in jets $25 each

    Various billet fuel logs. can be used for anything. the have -6 holes in the ends then 1/8 pipe along the top. have them with 3 all the way to 18

    ports. some are aft some automan. ask for pricing and styles.

    automan and aft air timers. $40

    Billet aluminum ssi front cover $100

    ssi starter gate $75

    set of 1 3/4 burndown tubes for valve covers. black annodized $100

    3 mallory coils and 2 caps $100 for all

    blower belts
    11mm 1595 belts 3 laps $50

    BDS 3H 1543 13.9mm 65mt $100

    8 Mgt 1600 104 $100

    8 Mgt 1600 84 $100


    30 new federal mogul and clevite 3" main bearings. $100 for all

    stock hemi valve covers $250

    5 and 3.5 inch blower snout. $250 and $200

    7 brass spark plug tubes 6 5/8 long $50

    14 1/8 diameter by 6" dual clutch liner. 1 steel and 1 titanium steel $100 ti $200

    16 lenco spragues $50 each

    5 gallon tote of various lenco stuff... i can send a pic $400 for all

    GIBSON MILLER PACKAGE everything to make 3 plus blowers complete with snouts if you can find cases... $750

    9 MODDIFIED original hemi stands missing one center. $100

    drive shafts

    40 spline driveshaft coupler $75

    40 spline shaft 14" long with 4" splines on each end $150

    1 1/4 32 spline shaft 21 1/8 long with 2.5 inches of pline on each end $100

    1 1/2 35 pline shaft 17 5/8 long with 4 1/2 inches of spline on each end $100

    titanium tripple spring retainers for 10 degree keepers.
    have hundreds in different styles. all new email me with a sample selling for $10 each.

    titanium springs 480 - 540lbs losts of new and a few with 4 passes or less.

    steel springs less then 400lbs $5 dollars a spring have hundreds.

    aircraft starter, has not been modified to fit racecar... its a blank canvas for a do it yourselfer. $300

    complete bae standard deck fuel heads. come with ti intakes 2 450 and 1 900 inconel exhaust valves. have 1/4 inch valve cover studs and inner studs.
    $1800

    bae 6" fuel pump extension. like new $100

    square groove 10 degree lash keepers $80 a set

    7/16 inner head studs 4.250 long $5 each

    3/8 course course intake stud 3.900 long $4 each

    rocker stand stud. 7/16 course bottom with 3/8 fine top 3.375 long. $5 each

    4 new 5191 cluctch discs with 1 3/4 course spline. around 360 thick $75 each

    Dechelis RS6 stands and ti shafts only 1 head $750

    various dechellis stands $100

    Goodyear pulleys $50 each.

    Large burst panels $15 each

    blower gears for SSI gibson miller and psi call for style. $50 set

    various blower drive couplers $50 each

    TFX 92 idler post and gear $100

    new blower drive starter dog $35 each

    various starter gates and belt gaurds $50 each

    set of rocker stands with shafts for $750

    billet aluminum throttle pedal with cromoly toe hook. new $275

    specialty tools all new

    Cylinder head work stands $140

    Blower work cradles $450

    Engine lifting handles $150

    Wheel sockets. 17 inches long have 1 1/16 and 15/16 $55

    11/16 and 3/4 sockets for cylinder heads and flywheel. 8 inches long. $50

    4 in 1 aluminum an wrench. annodized black or red. does -6 -8 -10 -12 $45

    quick release throttle stop annodized $55

    pro mod or funnycar blower lifting devise $300

    Make me a offer
    call or txt for pictures

    Mark Morris
    519 802 2917
     
    #1
    Last edited: Mar 23, 2014
  2. Mark_Morris

    Mark_Morris New Member

    Joined:
    Dec 4, 2007
    Messages:
    11
    Likes Received:
    0
    to the top please.
     
    #2

Share This Page