FOR SALE Nostalgia top fuel car

Nostalgia T/F NHRA Heritage Legal for 2013
Complete running Car


Rear motor plate to front end is all new with all NHRA updates
Updated 225” WB/ new Sterling front half with shorty body
Osborn canards an front wing
Front & rear complete spare motor plates
Donovan 429 cu in with after market griddle, able to check all mains with out pulling girdle
All titanium 10” glide clutch
Velasco 3.90 crank
Arias all new pistons
GRP rods
T/D rockers
Smith Bros push rods
Hot head valve covers (new power coat)
MSD 44 amp mag (red coil)
Strange 9 ½” ultra case rear end 40 spline axles
Carbon fiber brakes
Real racing wheels, full bead locks with Hoosier tires
Rob Moore reverser with custom dual sprag unit
DJ carbon fiber diaper (new certification)
Complete oil retention oil pan
Head pads
Foam fit driver insert
Engle roller cam / Crane roller lifters
8 5/8 trick titanium bell housing
RCD tri drive
Waterman 20.00 gpm certified fuel pump from Crawford
Complete dry sump system, System one oil pump
Hot heads converted set back manifold with Jackson nozzles
6:71 Retro blower with Korbeco rotors 8mm drive 40 lbs boost @ 9500 rpm
Taylor blower blanket (new certification)
Enderle bird catcher / Pete Jackson barrel valve
Racepac Pro1 computer with burn out recording (loaded)
AJ Billet Heads with Osborn aluminum exhaust diversion flanges and headers
Dual fire bottle system
American Racing front wheels with new late model t/f tires
New chute packs and pilot chutes (1 chute missing)
Rear tire covers

$50,000.00

Car is located two hrs. from the Las Vegas Drag strip
Butch Blair 925 229 3572 top fuel776@aol.com
Parts that could be included with the sale of the car
One complete AJ head ready to run with Osborn exhaust diversion plate
Spare Osborn exhaust diversion plate
12” wide new Real bead lock wheels. 2 ½” backspace, 5 on 5 ½” used set of 1300 M&H slicks
Lower end & clutch service trays
Spare motor plate with all attached hard wear
New GRP 3300 rods with L19 bolts
Smith Bros push rods, different lengths
2 Titan complete dry sump oil pumps
2 new side rails for girdle
MTI valve spring air gun (used with stainless valve retainers that are in all heads)
8mm gt pulleys
8mm blower belt (2)
Lots of 10” clutch disk and floaters
Air over hydraulic rear car lift with custom front car ramp
Custom tow dolly that lifts car and attaches to tow vehicle