Dechellis 426 Hemi Rocker Assembly FOR SALE!!!

Discussion in 'Old NRE X-1 Heads Free Classifieds' started by Nitrolink, Oct 1, 2012.

  1. Nitrolink

    Nitrolink Authorized Merchant

    Joined:
    Mar 12, 2007
    Messages:
    517
    Likes Received:
    3
    FOR SALE!!! FOR SALE!!! FOR SALE!!!

    Check out this top of the line COMPLETE 426 Hemi Rocker Assembly up for sale today! And just in time for the upcoming 2013 season... This state of the art set of Dechellis Stands loaded with Titanium Shafts includes a set of (8) Stage 5 Intake Rockers. And a set of (8) Stage 5 Exhaust Rockers. This set up works with your BAE, Dart, or Alan Johnson Fuel Heads that bolt up to your Keith Black, BAE, or TFX Rodeck cast or billet block. However, if you're running "fat heads" like what the A/Fuel cars are running, (such as Brad 4's, 5's 6's, etc.) these will not adapt to your application. Check out all the money saving extras that are included in this very special package!!!

    About the Stands & Shafts...
    This set of Dechellis Billet Aluminum Stands are the hi ratio style and equipped with upgraded Titanium Shafts instead of the steel ones. This is definitely one of the best set-ups on the market today for strength, performance and longevity, not to mention light weight. All Stands & Shafts are in great shape with normal minimal wear. Stands work with your 9/16 size head studs and are set up for the 3/8 size dowel pins on your heads. All were just inspected to be free of any visible stress cracks or damage. Upgraded Titanium Shafts are the popular 7/8 size. And brand new Rocker Shaft Springs, Shims, Roll Pins, Torx Bolts, and Shaft Pins are included as well. These Stands & Shafts are definitely a work of art as far as craftsmanship goes!

    About the Intake Rockers & Adjusters...
    A set of (8) Stage V (1.7) Intake Rockers are included and all are in great shape with normal wear. They are the newer style equipped with the super trick oiler holes to keep those ti shafts oiled up! Manton Adjusters included are brand new, in great shape and are the larger 7/16 size, instead of the smaller 3/8 size. They have #20 thread size. And measure 1 1/4" long and are center drilled for better oiling. And here's great news... They have the larger 3/8 ball size, instead of the smaller 5/16 size. Adjuster nuts are slightly used, in great shape and the popular 12 pt. 1/2" size. Rocker inside surfaces are clean with minimal wear and not all tore up. Outside surface, rollers and so on are also in nice shape with normal minimal wear. And these are ready to go to work...

    About the Exhaust Rockers & Adjusters...
    Also included is a set of (8) Stage 5 Exhaust Rockers to complete the package. This set is in great shape with normal wear and are the standard 1.565 ratio. All Exhaust Rockers just arrived back from Stage 5 and were freshened up with brand new Rollers and Pins. And have not been run since. Adjusters and Nuts on these are the exact same size as what's on the intake rockers. Which is pretty cool, because now you don't have to switch wrenches etc; to adjust both your Intake & Exhaust Rockers... Manton Adjusters are slightly used and in great shape and are the larger 7/16 size, instead of the smaller 3/8 size. And they also have #20 threads. They measure 1 1/4" long and also have the larger 3/8 ball size, instead of the smaller 5/16 size. Adjuster nuts are slightly used, in great shape and are the popular 12 pt. 1/2 size. Exhaust Rocker inside surfaces are nice and clean with normal minimal wear. Outside surface, threads and so on also have only normal minimal wear. Definitely one of the best Exhaust Rockers on the market today!

    Click here to see photos:
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Why buy new??? If you're running a Dragster, Funny Car, Altered, Doorslammer, Drag Boat, or Tractor Puller on Nitro, Alcohol, or Gas. And are in the market for an awesome Rocker Assembly loaded with the works, then look no further... This set-up is for you!!! And if you're looking to save MAJOR $$$'s, then you're definitely looking in the right place!!! Brand new this exact set-up will run you over $7600 BUCKS complete!!! But not here, not today!

    Priced to move at only $3950 OBO + shipping.

    More photos can be seen on RacingJunk item # 181742749. Or I can e-mail them to you directly upon request.

    For more info contact Brandon at: (916) 425-1427

    Or send me a message thru this site and I'll be glad to get back with you...

    We have a large amount of Nitro & Alcohol Racing Parts FOR SALE so just give us a call, or e-mail your "wish list" and we'll take it from there. Thanks for looking!!!
     
    #1
    Last edited: Feb 25, 2013
  2. Nitrolink

    Nitrolink Authorized Merchant

    Joined:
    Mar 12, 2007
    Messages:
    517
    Likes Received:
    3
    Bump to the top please!
     
    #2

Share This Page