Current Parts list for sale

Discussion in 'Noonan Classifieds' started by Butch Blair, Sep 23, 2014.

  1. Butch Blair

    Butch Blair Member

    Joined:
    Feb 7, 2007
    Messages:
    759
    Likes Received:
    3
    CURRENT PARTS FOR SALE LIST

    NEW set of egts with nuts and compression rings for Racepac $250.00

    Racepac flow meters -12 -10 -8 $650.00 ea

    Racepac psi transducers $100.00 ea
    60 psi have 2 of them

    Sunnen Hone rod and pin fitting machine with Sunnen AG-Series Precision Gauge $2500.00

    Engle R-22 big core 48degree 114 c/l fuel roller cam @ $350.00
    Engle R-22 small core 45 degree 112 c/l fuel roller cams 2 @ $350.00 ea

    Crower .904 roller lifters 7 pair $100.00

    Smith Bros push rods 7/16” taper wall 3/8” cup oal lengths 10 1/4 – 10 9/16- 11 5/16- 11 3/8 $20.00 ea (also have a lot of 5/16 cup different lengths)

    Bryant 4.50 full counter balanced cranks, no damage or repairs with small crack in # 4 main RCD or PSI spline $350.00 ea

    New billet 6” pump extension with RCD pump drive for Rodeck early hemi $250.00

    New Moroso single inlet oil pan, build in recessed pickup, billet rail for KB or BAE 5 ½ front 6 ½ rear, (real trick) $450.00

    Olson oil pan for TFX block with single inlet pickup 4 ½ front & 6” rear $300.00

    Valves
    7 used 2” x 3/8” .250 tip length titanium exhaust valves 5.135 ? long $200.00
    12 new stainless 2” x 11/32 .250 tip length exhaust valves 5.04 long $40.00 ea

    4 new 1.940”x 3/8” .250 tip length Enconal exhaust valves 5.14 long $100.00
    6 used titanium intake 11/32 x 2.375 .3.60? tip length 5.70 long ? $100.00
    16 titanium intake valves 3.750 x 11/16 stem @25,00 ea
    20 stainless exhaust valves 1.94 x 3/8”or 11/32 stem x 2.50 tip length x 5.01 long @20.00 ea


    RCD 4 stand for Roots blower, belt guard, starter cage, stands an studs $200.00
    Titanium blower starter drive dog $100.00

    SSI 4 stand billet front cover $100.00

    Blower pulley spacers ½” and 1” wide $25.00 ea

    Blower starter drive dog with bolts $50.00

    Mooneyham polished mag dow7 front blower cover excellent shape $75.0

    Lots of various length ½” head studs with 12 point nuts $10.00 ea
    Lot of various length 9/16” head studs $15.00 ea
    9/16 bottom side and 1/2" top side head studs 10” & 101/2” long $20.00 ea

    Olson late model hemi zombie headers, double flanged 2 ¾” power coated silver with egt bungs $300.00
    Same headers not power coated $250.00

    Titan dry sump oil pumps that fit RCD type drives $700.00 ea

    Sleeve pullers, slide hammer style $100.00

    Set of clutch feeler gauges with handles and cloth holder $100.00

    Piston installers 4.00 / 4.250 @ 30.00 ea

    C&A ring checkers (for round) 4.00 / 4.280 $35.00 ea

    Set of lift handles for setting engine block in and out of car $75.00

    Aluminum sanding plate 13x24x1” thick with handles for surfacing blowers, manifolds, etc. $75.00

    Dart billet Hemi heads (bare) 10 bolt $800.00

    AJ damaged stage 2 fuel head (repairable) $200.00

    SPS air powered valve spring gun that is used with there stainless spring cups $300.00

    4.250 & 4.280 KB STD length water sleeves $35.00 ea

    4.00 Venolia coated fuel pistons (1.094) for early hemi 10 in total $150.00

    4.187 Hemi coated fuel Venolia pistons 1.094 wrist pin 1.665 + or - c/h $35.00 ea

    Olson piston & rod aluminum holder (2) $50.00 ea.

    4.250-fuel hemi coated Venolia pistons 1.094 wrist pin size c/h (12) 1.602, 10) 1.627, (8} 1.647 $35.00 ea

    4.250 new piston rings 22 oil rings, 8 top .017 top rings, 12 - 1/16 2nd, 9 endless gap 2nd and a lot of good used rings. Buy all rings $350.00

    Buttons $ 8.00 per pair

    GRP pro 3300 hemi rods (lightened beam) 6.931 long 1.094 wrist pin L19 bolts 2 sets @ $800.00 per set

    GRP solid beam hemi rods 11- 6.931’ long and 6 – 6.921 long (excellent used) 1.094 pin size $800.00 for all

    B&J and Lenco input shafts $75.00

    B&J 2speed shift button $50.00

    1 ½” and 3/8” drive shaft couplers, male, female, connectors, drive shafts etc. $50.00 ea

    Valve cover single or double spark plug tubes 6 ¼” long $5.00 ea

    Plate that bolts on blower manifold for lifting assembled engine $35.00

    Snap On Digital / Pyrometer kit, check temp exhaust etc while engine is running $150.00

    Digital reading tire air checking / setting gauge (to the fraction) $125.00

    Weight gauge unit that sits on the ground and extends inside a given wheel for measuring weight at any 4 points car (0 to 1000 lbs) $75.

    Fixture to balance big and small end rods includes gram scale $150.00

    AIRCO mini DC heli ark model 130 complete with hoses, torch, regulator, small argon bottle 19” x 5” x 9” high 110 volt. A must have at the race track $800.00

    AFT air timer box for setting air timers $ 300.00

    Halibrand polished quick change rear end $2500.00

    MW wheel spacers ½” wide $40.00 per pair, also have a set 1 ½” wide
    Custom 1 3/8” wide wheel spacers 5 on 5 ½ bolt circle $50.00

    Liquid gauges (new) with ¼” pipe ends 15# 100# $25.00 ea

    Waterman fuel pump over drive units selection of racios $100.00

    Auto Meter dual RPM timing box (shows RPM while engine is running $200.00

    MSD programmable ignition controller pn. 8975 (new) $500.00

    MSD 44 amp like new magneto ccw, big cap & MSD 8142 coil $2000.00

    SAE (new) complete single mag drive with air retarder for hemi $700.00

    Hemi oil pump to magneto drives old style or SAE $40.00 ea

    MSD used set of hemi plug wires $50.00.

    MSD red or black 44amp coils 8142 $150.00 ea

    MSD large older style black 44amp coils $100.00 ea.

    MSD 8168 Pro Mag timing control box (new) $300.00

    MSD RPM activated switch kit new in package part # 8950 $75.00

    MSD 6 shooter with chips $200.00

    MSD kit to set 44amp magneto timing before start up small cap like new $50.00

    MSD new small cap, rotor an top wire retainer $75.00

    Miersh battery pack charger 24v $50.00

    Manifolds with timers and jets complete systems. What are your needs?

    Enderle fuel pump 1100 coated (17.2 gpm) $350.00

    Dave Benjamin single inlet fuel pumps with build in changeable gear sets to under drive or over drive (25 gpm to 55 gpm 1 3/8 or 2” inlet with quick disconnect attachment) $1200.

    Enderle and Waterman, pills, screw in jets, drop in jets, nozzle jets $3.00 ea

    Enderle large billet nitro barrel valve fresh from Enderle with ck valves $500.00

    Enderle –8 4way shut off valve $75.00

    Billet aluminum fuel discharge block has 8 - 8 & 2 -12 AN outlet holes and 2 mounting holes (real nice) $100.00

    Kessler complete fuel hydrometer kit 50% with thermometer, beaker and wood box $150.00

    Moroso single spin on filter bracket flat surface or frame mount $50.00

    All Titanium 10” large 6 stand glide, titanium stands, Hemi scalloped steel flywheel with new disk and floaters $3000.00 with titanium flywheel $3500.00

    Crower 2 or 3 disk petal clutch, 10” large titanium stands, includes disk, floaters, fresh, hemi flywheel with or with out ring gear $2000.00

    Titanium 10” Crower clutch donut plate (peddle clutch) (fresh) $800.00
    Aluminum $400.00 (both are very nice)

    Titanium six stands and adjusters for 9/16” studs $600.00

    10” hemi steel (scalloped) 6 large stand flywheel fresh surface $800.00

    Complete AFT 10 ½ “ 4 disk all titanium glide with titanium flywheel 5/8” studs 6 stand, set up with 6 primary levers and 3 lock ups $2500.00 (could have up to 12 lock ups total I may have the levers)

    AFT 10 ½” titanium flywheel with 5/8” studs (6 stand) $800.00

    New 10” billet aluminum East West Eng. hemi flywheel with ring gear (large 9/16” 6 stand studs, nuts and bearing (trick) $600.00

    Lenco throw out bearing an collars (4 different lengths) $50.00 ea

    Titanium ¼” & ½” wide clutch stand spacers for 9/16” studs $75.00 for set of 6

    Clutch disk 1 3/8”, 1 ½”, 1 ¾” hubs
    10” clutch disk and floaters Rockwell on disk 65 +
    Fresh surfaced disk .280 + or - $30.00 ea
    .300 to .340 $50.00 ea
    New .380 $110.00 ea
    Floaters fresh surfaced .280 + or - $20.00 ea
    .300 + $30.00 ea
    New .330 to .350 $50.00 ea
    Also have 10 ½”x 1 ½’ hub (new & fresh surface 3 cutter) disk an floaters
    10 ½” 3 cutter floaters 6 (large) stand 2 new .400 @ $50.00 ea.
    Fresh cut .350 & .317 @ $30.00 ea
    .
    Champion N60 N57 $2.00 ea
    Ecell 141 “

    Spark plug holder (holds 80) $50.00

    Air pump and hose for drum pumping oil $100.00

    16” wheel liners and tubes @ 100.00 ea

    Weld front dragster wheels (gold with large circle design) (one has scrape around outside rim?) includes bearings. $250.00

    Blower Pulleys aluminum hard anodized
    8mm GT (new) all $75.00 ea
    53t
    54t
    55t
    56t
    61t
    62t
    8mm polished aluminum $75.00
    63t
    65t with degree cut into it $50.00

    14mmGT (.250 offset) (hard anodized) $75.00 ea
    29t new
    30t used
    31t used
    32t used

    !4mmGT (no offset)
    32t mag $65.00
    35t $65.00
    39t $100.00
    40t $100.00
    41t $100.00

    14mm GT. (750 offset) 29t (hard anodized black) new $75.00

    13.9mm.
    27t $50.00 ea
    29t

    Used Blower Belts
    2 ½” w 111 t 14mm (1) $50.00
    3 belts 112 t 1568 84ps 14mm GT 3.3” wide with one run like new $100.00 ea ($387.00 new from RCD)

    These parts are located 1 1/2hrs from Las Vegas

    Added information and pictures available, all emails answered

    925 229 3572
    topfuel776@aol.com
     
    #1
  2. fdlock890

    fdlock890 Member

    Joined:
    Jun 3, 2009
    Messages:
    180
    Likes Received:
    0
    #2
  3. Shakedown

    Shakedown Jr. Dragster

    Joined:
    Feb 12, 2005
    Messages:
    182
    Likes Received:
    0
    ejhickl@gmail.com liners and spacers
     
    #3

Share This Page