Current Parts for sale

CURRENT PARTS FOR SALE LIST

NEW set of egts with nuts and compression rings for Racepac $250.00

Racepac psi transducers $100.00 ea
1-60
1-300 sold
Temp sold

-12 flow meter $650.00 sold

Sunnen Hone rod and pin fitting machine with Sunnen AG-Series Precision Gauge $2500.00

Engle R-22 big core 48degree 114 c/l fuel roller cam @ $350.00
Engle R-22 small core 45 degree 112 c/l fuel roller cams 2 @ $350.00 ea

Crower .904 roller lifters 7 pair $100.00

Smith Bros push rods 7/16” taper wall 3/8” cup oal lengths 10 1/4 – 10 9/16- 11 5/16- 11 3/8 $20.00 ea (also have a lot of 5/16 cup different lengths)

Bryant 4.50 full counter balanced cranks, no damage or repairs with small crack in # 4 main RCD or PSI spline $350.00 ea

RCD 2 key way crank hub with degree wheel $150.00 sold
RCD 2 key way crank hub with bolt an degree wheel for crank support $150.00

TFX billet cover complete gear drive includes crank hub and degree wheel (2 key) $450.00 sold

New pair of RCD crank trigger brackets for TFX $100.00

New billet 6” pump extension with RCD pump drive for Rodeck early hemi $250.00

New Moroso single inlet oil pan, build in recessed pickup, billet rail for KB or BAE 5 ½ front 6 ½ rear, (real trick) $450.00

Olson oil pan for TFX block with single inlet pickup 4 ½ front & 6” rear $300.00

Valves
7 used 2” x 3/8” .250 tip length titanium exhaust valves 5.135 ? long $200.00
12 new stainless 2” x 11/32 .250 tip length exhaust valves 5.04 long $40.00 ea

4 new 1.940”x 3/8” .250 tip length Enconal exhaust valves 5.14 long $100.00
6 used titanium intake 11/32 x 2.375 .3.60? tip length 5.70 long ? $100.00
16 titanium intake valves 3.750 x 11/16 stem @25,00 ea
20 stainless exhaust valves 1.94 x 3/8”or 11/32 stem x 2.50 tip length x 5.01 long @20.00 ea

SSI 1471 B rotor blower fresh never hurt with 4” drive with new RCD belt guard and starter cage $2,500 sold

RCD 3 or 4 stand blower belt guards with starter cage, stands an studs $250.00

SSI 3 or 4 stand billet front cover $100.00

Blower pulley spacers ½” and 1” wide $25.00 ea

Mooneyham polished mag dow7 front blower cover excellent shape $75.00

Gerardo low profile mag injector (three 5” butterflies) with new gold power coating, blocked off for smaller opening, includes stainless lines, metering block an hardware $1000.00 With big billet Enderle barrel valve installed with linage add $500.00 sold

Lots of various length ½” head studs with 12 point nuts $10.00 ea
Lot of various length 9/16” head studs $15.00 ea
9/16 bottom side and 1/2" top side head studs 10” & 101/2” long $20.00 ea

Olson late model hemi zombie headers, double flanged 2 ¾” power coated silver with egt bungs $300.00
Same headers not power coated $250.00

Titan dry sump oil pumps that fit RCD type drives $700.00 ea

Sleeve pullers, slide hammer style $100.00

Piston installers 4.00 / 4.250 @ 30.00 ea

C&A ring checkers (for round) 4.00 / 4.280 $35.00 ea

Set of lift handles for setting engine block in and out of car $75.00

Dart billet Hemi heads (bare) 10 bolt $800.00

AJ damaged stage 2 fuel head (repairable) $200.00

SPS air powered valve spring gun that is used with there stainless spring cups $300.00

4.250 & 4.280 KB STD length water sleeves $35.00 ea

4.00 Venolia coated fuel pistons (1.094) for early hemi including rings, wrist pins, buttons, pistons installer, C&A ring checker. Call for pricing

4.187 fuel pistons coated Venolia pistons 1.094 wrist pin 1.665 c/h $35.00 ea

Olson style piston / rod aluminum holder $75.00

4.250-fuel hemi coated Venolia pistons 1.094 wrist pin size c/h (12) 1.602, 10) 1.627, (8} 1.647 $35.00 ea

4.250 new piston rings 22 oil rings, 8 top .017 top rings, 12 - 1/16 2nd, 9 endless gap 2nd and a lot of good used rings. Buy all rings $350.00

Buttons $ 8.00 per pair

GRP pro 3300 6.931 long 1.094 wrist pin L19 bolts (new) hemi journal size $800.00

Crower solid beam hemi rods 11-1/8’ and 6 -1/16 long (used) 1.094 pin size $50.00 ea

B&J and Lenco input shafts $75.00

B&J 2speed shift button $50.00

1 ½” and 3/8” drive shaft couplers, male, female, connectors, drive shafts etc. $50.00 ea

Valve cover single or double spark plug tubes 6 ¼” long $5.00 ea

Plate that bolts on blower manifold for lifting assembled engine $35.00

Gram scale $100.00

Snap On Digital / Pyrometer kit, check temp exhaust etc while engine is running $100.00

Main cap removal slide hammer tool $50.00 sold

Lash cap slide hammer removal tool $25.00 sold

Digital reading tire air checking / setting gauge (to the fraction) $125.00

Weight gauge unit that sits on the ground and extends inside a given wheel for measuring weight at any 4 points car (0 to 1000 lbs) $75.00

New rolling tool box $200.00

Fixture to balance big and small end rods includes gram scale $150.00

AIRCO mini DC heli ark model 130 complete with hoses, torch, regulator 19” x 5” x 9” high 110 volt. A must have at the race track $800.00

AFT air timer box for setting air timers $ 300.00

Halibrand polished quick change rear end $2500.00

MW wheel spacers ½” wide $40.00 per pair, also have a set 1 ½” wide
Custom 1 3/8” wide wheel spacers 5 on 5 ½ bolt circle $50.00

Liquid gauges (new) with ¼” pipe ends 15# 100# $25.00 ea

Auto Meter dual RPM timing box (shows RPM while engine is running $200.00

MSD programmable ignition controller pn. 8975 (new) $500.00

MSD 44 amp like new magneto ccw, big cap & MSD 8142 coil $2000.00

SAE (new) complete single mag drive with air retarder for hemi $700.00

Hemi oil pump to magneto drives old style or SAE $40.00 ea.

MSD red or black coils 8142 $150.00 ea

MSD large older style black coils $100.00 ea.

MSD 8168 Pro Mag timing control box (new) $300.00

MSD RPM activated switch kit new in package part # 8950 $75.00

MSD 6 shooter with chips $200.00

MSD kit to set 44amp magneto timing before start up small cap like new $50.00

MSD new small cap, rotor an top wire retainer $75.00

Miersh battery pack charger 24v $75.00

Manifolds with timers and jets complete systems. What are your needs?

Enderle fuel pump 1100 coated (17.2 gpm) $350.00

Dave Benjamin single inlet fuel pumps with build in changeable gear sets to under drive or over drive (25 gpm to 55 gpm 1 3/8 or 2” inlet with quick disconnect attachment) $1200.00

Waterman .850 gear set $100.00 sold

DJ Safety 1471-blower restraint plate with 5 new straps and hard wears $150.00 sold
Plate only $25.00

Enderle and Waterman, pills, screw in jets, drop in jets, $4.00 ea

Enderle large billet nitro barrel valve fresh from Enderle with ck valves $500.00

Enderle –8 4way shut off valve $75.00

Billet aluminum fuel discharge block has 8 - 8 & 2 -12 AN outlet holes and 2 mounting holes (real nice) $100.00

Kessler complete fuel hydrometer kit 50% with thermometer, beaker and wood box $150.00

Moroso single spin on filter bracket flat surface or frame mount $50.00

All Titanium 10” large 6 stand glide, titanium stands, Hemi scalloped steel flywheel with new disk and floaters $3000.00 with titanium flywheel $3500.00

Crower 2 or 3 disk petal clutch, 10” large titanium stands, includes disk, floaters, fresh, hemi flywheel with or with out ring gear $1,800.00 or $2000.00

Titanium 10” Crower clutch donut plate (fresh) for peddle clutch $800.00
Aluminum $400.00 (both are very nice)

New set of Crower 10” clutch pads $100.00 sold

Titanium six stands and adjusters for 9/16” studs $600.00

10” hemi steel (scalloped) 6 large stand flywheel fresh surface $800.00

Complete AFT 10 ½ “ 4 disk all titanium glide with titanium flywheel 5/8” studs 6 stand, set up with 6 primary levers and 3 lock ups $2500.00 (could have up to 12 lock ups total I may have the levers)

AFT 10 ½” titanium flywheel with 5/8” studs (6 stand) $800.00

New 10” billet aluminum East West Eng. hemi flywheel with ring gear (large 9/16” 6 stand studs, nuts and bearing (trick) $600.00

Lenco throw out bearing an collars (4 different lengths) $50.00 ea

Titanium ¼” & ½” wide clutch stand spacers for 9/16” studs $75.00 for set of 6 $100.00

Clutch disk 1 3/8”, 1 ½”, 1 ¾” hubs
10” clutch disk and floaters Rockwell on disk 65 +
Fresh surfaced disk .280 + or - $30.00 ea
.300 to .340 $50.00 ea
New .380 $110.00 ea
Floaters fresh surfaced .280 + or - $20.00 ea
.300 + $30.00 ea
New .330 to .350 $50.00 ea
Also have 10 ½”x 1 ½’ hub (new & fresh surface 3 cutter) disk an floaters
10 ½” 3 cutter floaters 6 (large) stand 2 new .400 @ $50.00 ea.
Fresh cut .350 & .317 @ $30.00 ea
.
NGK v-power-9 $2.00 ea
Champion N60 “
Ecell 141 “

Spark plug holder (holds 80) $75.00

Air pump and hose for drum pumping oil $100.00

16” wheel liners and tubes @ 100.00 ea

Weld front dragster wheels (gold with large circle design) (one has scrape around outside rim?) includes bearings. $300.00

Blower Pulleys aluminum hard anodized
8mm GT (new) all $75.00 ea
53t
55t
56t
61t
65t
8mm polished aluminum $75.00
63t

14mmGT (.250 offset) (hard anodized) $75.00 ea
29t new
30t used
31t used
32t used

!4mmGT (no offset)
32t mag $65.00
35t $65.00
39t $100.00
40t $100.00
41t $100.00

14mm GT. (750 offset) 29t (hard anodized black) new $75.00

13.9mm.
27t $50.00 ea
29t

Used Blower Belts
2 ½” w 111 t 14mm (1) $50.00
3 belts 112 t 1568 84ps 14mm GT 3.3” wide with one run like new $100.00 ea ($387.00 new from RCD)

These parts are located 1 1/2hrs from Las Vegas

Added information and pictures available, all emails answered

925 229 3572
topfuel776@aol.com

 

PM sent.

Thanks, Lock

 

Parts

Can you send pics of lifters (7 pair) , d&j restraint and main cap puller to Lmskinner@me.com. Thanks Danny