Crank hub help

Discussion in 'Manton Push Rods Top Alcohol Tech Questions' started by vht, May 16, 2017.

  1. vht

    vht Member

    Joined:
    Sep 14, 2011
    Messages:
    38
    Likes Received:
    1
    I know this site is more for racing, but I could use some advice so I don't screw something up. I had asked about just running a crank hub on a 454 once before and you all said it was alright, well, I'm putting together a street and strip, 427 BBC, H beam rods, 6223 GM std steel crank, 6-71 with 2 750 Holley carbs. It'll be internally balanced. The guy that does my machine work said it'll take the bearings out with just the hub and no balancer. He doesn't build a lot of blower motors, so do you all think with some street driving involved will it hold up? I don't see a problem, but I've never done it.
     
    #1
  2. aj481x

    aj481x Member

    Joined:
    Jan 27, 2004
    Messages:
    908
    Likes Received:
    8
    It will work, but I would use ATI blower damper.
     
    #2
  3. WIZBANG

    WIZBANG Member

    Joined:
    Nov 8, 2004
    Messages:
    748
    Likes Received:
    1
    Ditto !
     
    #3

Share This Page