Closing up roots blower outlet

Discussion in 'PSI Superchargers Tech Questions' started by Raymond Raaymakers, Nov 8, 2005.

  1. Raymond Raaymakers

    Raymond Raaymakers New Member

    Joined:
    Oct 25, 2005
    Messages:
    43
    Likes Received:
    0
    I am running a standard helix magnesium stripped Mooneyham blower with a Burnett carbon fibre hat that has closed up the intake of the blower by about 30%. This has worked really well with more boost etc.

    I am wondering about closing up the blower outlet using an alloy plate between blower and manifold. I have thought about the "Delta" (pie shape) at both ends and also just matching the hat opening.

    Has anybody any suggestions on this practice.

    Cheers Ray
     
    #1
    Raymond Raaymakers, Nov 8, 2005
  2. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    If your compare your blower outlet to a "retro" I believe it does more than just change the outlet to a pie shape it actually moves the opening further forward to take advantage of the high angle of the blower output change. I believe this may not be possible with your blower. Call Mooneyham and ask them if they can do it.
     
    #2
    Mike Canter, Nov 8, 2005

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM